CSWP Weldments 5

Question 1

In SOLIDWORKS Weldments, which corner treatment type creates an end cut where one member's face is trimced flush against the side face of another member?

Accepted Answer

Butt joint (end butts against face)

Answer

A butt joint treatment trims one member so its end face sits flush against the side face of the intersecting member, leaving the second member uncut.

Question 2

When you save weldment custom properties (such as FINISH or WEIGHT) in the cut list item properties, where are these values stored in the SOLIDWORKS file?

Accepted Answer

As custom properties on each individual solid body within the cut list folder

Answer

Cut list item custom properties are stored directly on each solid body (accessible through the cut list folder), separate from the part-level file properties.

Question 3

What constraint must be satisfied in a 3D path sketch for SOLIDWORKS Weldments Structural Member to work correctly?

Accepted Answer

Sketch entities at junctions must share endpoints (be connected)

Answer

For weldment paths, sketch line entities that meet at joints must share coincident endpoints so SOLIDWORKS can correctly identify intersections for corner treatment.

Question 4

Which option in the Structural Member PropertyManager controls how the profile is aligned when the path segment changes direction in a 3D sketch?

Accepted Answer

Alignment (Normal to Profile or Minimum Twist)

Answer

The Alignment option (Normal to Profile vs. Minimum Twist) controls how the profile cross-section is oriented as it travels along a non-planar 3D path.

Question 5

After completing a weldment part, you need individual flat-pattern drawings for each structural member. What is the most efficient SOLIDWORKS approach?

Accepted Answer

Use 'Save Bodies' to generate individual part files from each weldment body

Answer

'Save Bodies' (Insert > Features > Save Bodies) creates individual part files from each weldment solid body, which can then be detailed in their own drawings.

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

CSWP Weldments 5