CSWP Weldments 2 — Questions and Answers
Question 1: When creating a weldment structural member, what controls the orientation of the profile along a path segment?
- Sketch plane normal
- Profile alignment angle in the Structural Member PropertyManager (Correct answer)
- The global coordinate system X-axis
- The first pierce point of the sketch
Correct answer: Profile alignment angle in the Structural Member PropertyManager
The rotation angle field in the Structural Member PropertyManager rotates the 2D profile around the path to achieve the desired orientation.
Question 2: Which weldment feature allows you to remove material at the intersection of two structural members to create a clean joint?
- Trim/Extend (Correct answer)
- End Cap
- Fillet Bead
- Corner Treatment
Correct answer: Trim/Extend
The Trim/Extend feature in Weldments trims or extends structural member bodies so they meet cleanly at their intersections.
Question 3: In a SOLIDWORKS weldment, what is the purpose of the 'Locate Profile' option when inserting a structural member?
- It snaps the profile centroid to the sketch segment endpoint
- It allows you to specify which point on the profile aligns to the path sketch (Correct answer)
- It automatically places the profile at the center of mass
- It locks the profile to prevent rotation
Correct answer: It allows you to specify which point on the profile aligns to the path sketch
Locate Profile lets you choose a pierce point (corner, midpoint, or custom point) on the 2D cross-section to align with the 3D path sketch.
Question 4: What type of sketch is used as the foundation for weldment structural member paths?
- 3D sketch only
- 2D sketch only
- Either 2D or 3D sketch (Correct answer)
- A reference curve converted from an edge
Correct answer: Either 2D or 3D sketch
SOLIDWORKS Weldments supports both 2D and 3D sketches as path sketches for placing structural member profiles.
Question 5: When you split a structural member path segment into groups in the Structural Member command, what is the primary benefit?
- Each group can have a different member length
- Each group can use a different profile type or size (Correct answer)
- Each group is assigned its own cut list folder automatically
- Each group can be assigned a different material
Correct answer: Each group can use a different profile type or size
Separating segments into different groups within the Structural Member command allows each group to use a distinct profile standard, type, and size.
Question 6: What is the function of the 'End Cap' feature in SOLIDWORKS Weldments?
- Adds a plate to close the open end of a hollow structural member (Correct answer)
- Trims the end of a member at a specified angle
- Creates a weld bead around the perimeter of a cut end
- Mirrors a member end to the opposite side of the frame
Correct answer: Adds a plate to close the open end of a hollow structural member
End Cap adds a flat plate feature that closes the hollow cross-section at the open end of a structural member tube or channel.
Question 7: In the SOLIDWORKS Weldments Cut List, which property is automatically populated based on the structural member's path segment length?
- MATERIAL
- DESCRIPTION
- LENGTH (Correct answer)
- QUANTITY
Correct answer: LENGTH
The LENGTH cut list property is automatically calculated from the path segment and populated for each structural member body.
CSWP Weldments 2
When creating a weldment structural member, what controls the orientation of the profile along a path segment?