CSWP Simulation & Design Validation Tools 2

Question 1

In SOLIDWORKS Simulation, what does a von Mises stress result indicate?

Accepted Answer

A scalar stress value used to predict yielding in ductile materials

Answer

Von Mises stress is a scalar value derived from all stress components, used with the von Mises yield criterion to predict yielding in ductile materials.

Question 2

Which Simulation study type is most appropriate for analyzing a part subjected to a continuously rotating load over many cycles?

Accepted Answer

Fatigue study

Answer

A Fatigue study evaluates cumulative damage from cyclic loading and predicts the life of a component under repeated stress cycles.

Question 3

What is the purpose of mesh refinement in SOLIDWORKS Simulation?

Accepted Answer

To improve result accuracy in regions of high stress gradient

Answer

Refining the mesh in critical regions increases element density, improving accuracy where stress or displacement changes rapidly.

Question 4

In a SOLIDWORKS Flow Simulation project, what does a 'Cut Plot' display?

Accepted Answer

A cross-sectional view of flow parameters on a specified plane

Answer

A Cut Plot shows flow results (velocity, pressure, temperature, etc.) on a user-defined cross-sectional plane through the model.

Question 5

Which boundary condition in SOLIDWORKS Simulation prevents all translational and rotational motion at a face?

Accepted Answer

Fixed Geometry

Answer

Fixed Geometry constrains all six degrees of freedom (three translational and three rotational) at the selected entity.

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

CSWP Simulation & Design Validation Tools 2