CSWP Sheet Metal Design 2 — Questions and Answers
Question 1: What is the purpose of a Hem feature in SolidWorks sheet metal?
- To fold an edge back on itself to eliminate sharp edges and add stiffness (Correct answer)
- To punch a hole through a flat sheet metal face
- To add a reinforcing rib across a large flat panel
- To weld two overlapping sheet metal edges together
Correct answer: To fold an edge back on itself to eliminate sharp edges and add stiffness
A Hem folds the edge of a sheet metal part back onto itself, eliminating the sharp cut edge and adding stiffness along the part boundary.
Question 2: Which SolidWorks sheet metal feature creates a step-like Z-shaped offset in a flange?
- Jog (Correct answer)
- Corner Trim
- Dimple
- Cross Break
Correct answer: Jog
The Jog feature creates a two-bend offset (Z-profile) in a sheet metal flange, allowing a face to transition to a parallel plane at a different elevation.
Question 3: What is the function of Forming Tools in SolidWorks sheet metal?
- To add stamped features such as louvers, lances, ribs, and dimples (Correct answer)
- To calculate custom bend deduction values for exotic materials
- To automatically generate flat pattern DXF export files
- To measure the developed length along a complex bend path
Correct answer: To add stamped features such as louvers, lances, ribs, and dimples
Forming Tools are library-based solid bodies that simulate press-die operations, adding embossed features like louvers, lances, and dimples to sheet metal parts.
Question 4: What does the Bend Deduction method calculate in sheet metal flat pattern development?
- The amount subtracted from the sum of flange lengths to yield the flat pattern length (Correct answer)
- The angular difference subtracted from the nominal bend angle
- The material volume removed from a hemmed edge
- The perpendicular offset distance for a jog feature
Correct answer: The amount subtracted from the sum of flange lengths to yield the flat pattern length
Bend Deduction is subtracted from the total length of the unbent flanges to determine the correct flat pattern length, compensating for material behavior at the bend.
Question 5: What is a Lofted Bend feature in SolidWorks sheet metal?
- A feature that creates a transition between two dissimilar open sketch profiles (Correct answer)
- A series of evenly spaced parallel bends across a large panel
- A curved bend swept along a non-linear guide path
- A bend generated from a closed rectangular sketch profile
Correct answer: A feature that creates a transition between two dissimilar open sketch profiles
A Lofted Bend creates a sheet metal transition body between two open profiles on separate planes, commonly used for rectangular-to-round duct transitions.
Question 6: What does Corner Relief do in SolidWorks sheet metal?
- Prevents material overlap or tearing at the intersection of two converging bends (Correct answer)
- Adds decorative notches to improve the appearance of visible corners
- Reinforces corner zones against fatigue from cyclic loading
- Creates clearance for fastener heads at corner joint locations
Correct answer: Prevents material overlap or tearing at the intersection of two converging bends
Corner Relief cuts material at the junction where two bends meet, preventing the material from distorting or overlapping when both flanges are formed.
Question 7: Which SolidWorks command is the primary method for converting an imported thin-walled solid body into an editable sheet metal part?
- Insert Bends
- Convert to Sheet Metal (Correct answer)
- Sheet Metal Repair
- Rip and Flatten
Correct answer: Convert to Sheet Metal
Convert to Sheet Metal allows you to select a thin solid shell, specify bend edges and sheet metal parameters, and convert it into a parametric sheet metal part with full flat pattern capability.
CSWP Sheet Metal Design 2
What is the purpose of a Hem feature in SolidWorks sheet metal?