CSWP Motion Studies 5

Question 1

What is the primary advantage of using 'Path Mate' in a Motion Study over manually keying positions along a curve?

Accepted Answer

It constrains a component to follow a sketch curve, simplifying motion definition along complex paths

Answer

A Path Mate forces the component's reference point to stay on a defined sketch path, making curved-path animation straightforward without manually setting many key points.

Question 2

In Motion Analysis, which term describes the number of independent coordinates required to fully define the position of all bodies in the mechanism?

Accepted Answer

Degrees of Freedom (DOF)

Answer

Degrees of Freedom (DOF) counts the minimum number of independent variables needed to describe the complete configuration of the mechanism.

Question 3

When setting up an 'Oscillating' linear motor in Motion Analysis using a data function, which input type would produce reciprocating motion?

Accepted Answer

Sine/Cosine expression

Answer

A sine or cosine displacement function causes the motor to move back and forth symmetrically, producing oscillating reciprocating motion.

Question 4

How do you prevent a component from participating in Motion Analysis dynamics while keeping it visible in the assembly?

Accepted Answer

Fix it to ground using a Fixed constraint or a fully-defined Ground mate set in the study

Answer

Applying a Fixed (ground) constraint in the Motion Study makes the component immovable for the solver while leaving it visible.

Question 5

What does the 'Trace Path' tool in a Motion Study output?

Accepted Answer

A 3D sketch curve tracing the path of a selected point during the simulation

Answer

Trace Path generates a 3D sketch in the assembly that follows the trajectory of a chosen reference point throughout the motion study.

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

CSWP Motion Studies 5