Sweep and Loft Features Flashcards
7 cards from real CSWA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Sweep and Loft Features flashcards as text
What does the 'Keep Normal Constant' option do in a Sweep feature?
Answer: The profile maintains its original orientation relative to the world coordinate system
Keep Normal Constant maintains the profile's original orientation relative to the fixed world coordinate system rather than rotating to stay perpendicular to the path.
To create a coil spring in SolidWorks, which combination of features is typically used?
Answer: Sweep with a circular profile and a helix as the path
A coil spring is created by sweeping a circular cross-section profile along a helix path, producing the characteristic helical coil geometry.
Adding more intermediate profiles between the start and end of a Loft feature primarily controls:
Answer: The shape transitions along the loft between specified locations
Intermediate profiles give you additional control points to define exactly how the shape transitions along the length of the loft feature.
In SolidWorks, a Swept Boss/Base feature is accessed through which menu path?
Answer: Insert > Features
Swept Boss/Base, along with other solid modeling features, is located under Insert > Features in the SolidWorks menu bar.
When a point is used as one of the profiles in a Loft feature, what is the result?
Answer: The loft creates a tapered end that converges to that point
Using a point as a loft profile creates a tapered termination where the geometry converges to that single location, useful for cone-like or sharp-tipped geometry.
The 'Align with end faces' option in a Sweep feature is useful because it:
Answer: Adjusts the sweep termination to match the angle of the bounding model faces
'Align with end faces' adjusts how the sweep terminates so its end face matches the adjacent model geometry, ensuring smooth integration with existing features.
Which of the following statements about Loft profiles in SolidWorks is TRUE?
Answer: Profiles can be on non-parallel planes and even defined as 3D sketches
Loft profiles can be placed on non-parallel planes and can even be 3D sketches, providing great flexibility for creating complex organic shapes.