CSS - Certified Safety Supervisor Electrical Safety and LOTO Questions and Answers 1

Question 1

A supervisor is assigning roles for a major repair on a conveyor system. One employee will be performing the actual maintenance requiring lockout, and several others work on the production line that the conveyor feeds. In the context of Lockout/Tagout (LOTO), how are these employees classified according to OSHA 29 CFR 1910.147?

Accepted Answer

The maintenance employee is an 'authorized employee' and the others are 'affected employees.'

Answer

According to OSHA 29 CFR 1910.147(b), an 'authorized employee' is a person who locks out or tags out equipment to perform servicing or maintenance. An 'affected employee' is one whose job requires them to operate the equipment on which servicing is being performed or to work in the area. Therefore, the maintenance employee performing the work is authorized, and the production line workers are affected.

Question 2

A team of three mechanics is preparing to perform a complex overhaul on a large industrial press. As the safety supervisor, which of the following actions is a primary requirement for a compliant group lockout procedure?

Accepted Answer

Each authorized employee affixes their personal lockout device to the group lockbox or hasp.

Answer

OSHA's group lockout standard, 29 CFR 1910.147(f)(3), requires that each authorized employee has personal control over the hazardous energy. This is achieved when each employee attaches their own personal lockout device to a group lockout mechanism, such as a lockbox or hasp, ensuring the equipment cannot be re-energized until every individual has completed their work and removed their personal lock.

Question 3

An electrical panel must be opened for diagnostic testing while energized. According to OSHA standards, which of the following individuals is permitted to perform this task?

Accepted Answer

A 'qualified person' with skills and knowledge of the equipment and safety training to recognize and avoid the associated hazards.

Answer

OSHA 29 CFR 1910.399 defines a 'qualified person' as one who has received training in and has demonstrated skills and knowledge in the construction and operation of electric equipment and installations and the hazards involved. Only qualified persons are permitted to work on or near exposed energized parts. The other roles do not meet the specific requirements for this high-hazard task.

Question 4

A machine operator needs to clear a minor jam that is a routine part of the production process. The task is repetitive and does not require the operator to place any part of their body into the point of operation where a hazard exists. According to 29 CFR 1910.147, which of the following is true?

Accepted Answer

The task is exempt from LOTO under the 'normal production operations' exception, provided effective alternative protection is used.

Answer

This scenario fits the exception outlined in 29 CFR 1910.147(a)(2)(ii). Minor servicing activities that are routine, repetitive, and integral to production are not covered by the LOTO standard if alternative measures provide effective protection (e.g., machine guarding under Subpart O).

Question 5

A qualified maintenance technician must measure voltage on energized terminals inside a 480V motor control center. As a supervisor, which administrative control is most critical to verify before this work begins?

Accepted Answer

An Energized Electrical Work Permit (EEWP) has been completed and authorized.

Answer

NFPA 70E, a standard often referenced by OSHA for electrical safety, requires a documented Energized Electrical Work Permit (EEWP) before work is performed on or near energized parts, unless the work meets specific exemptions like testing. The permit process ensures that justification for energized work is established, hazards are analyzed, and proper protective measures are in place. It is the most critical administrative control for such a high-risk task.

(CSS) Certified Safety Supervisor Practice Test

(CSS) Certified Safety Supervisor Practice Test

CSS - Certified Safety Supervisor Electrical Safety and LOTO Questions and Answers 1