CSPM Security Industry-Specific Knowledge 5

Question 1

Which federal act requires federal contractors and subcontractors to report cyber incidents involving covered defense information (CDI) to the DoD within 72 hours?

Accepted Answer

DFARS 252.204-7012

Answer

DFARS clause 252.204-7012 mandates that defense contractors report cybersecurity incidents involving covered defense information to DoD's DIBNet portal within 72 hours.

Question 2

In the context of hotel security management, which industry concept describes the legal duty a hotel owes to guests to provide reasonable protective measures against foreseeable criminal acts?

Accepted Answer

Premises Liability under Innkeeper Law

Answer

Premises liability under innkeeper law holds hotels to a heightened duty to protect guests from foreseeable criminal acts given the transient and vulnerable nature of hotel guests.

Question 3

A security project manager is implementing a CBRN detection system at a convention center. What does the 'N' in CBRN stand for?

Accepted Answer

Nuclear

Answer

CBRN stands for Chemical, Biological, Radiological, and Nuclear—the four categories of weapons of mass destruction that emergency response and detection systems address.

Question 4

Under OSHA 29 CFR 1910.119, what type of security and safety management program is required for facilities that handle highly hazardous chemicals above threshold quantities?

Accepted Answer

Process Safety Management (PSM) Program

Answer

OSHA's Process Safety Management (PSM) standard requires a comprehensive program—including hazard analysis, operating procedures, and incident investigation—for facilities with threshold quantities of highly hazardous chemicals.

Question 5

When securing a healthcare facility's emergency department, which type of security assessment tool evaluates patient, staff, and visitor flow to identify vulnerability chokepoints?

Accepted Answer

Crime Prevention Through Environmental Design (CPTED) Review

Answer

A CPTED review analyzes how the physical environment—including layout, sight lines, and access flow—can be designed or modified to reduce criminal opportunity and vulnerability.

(CSPM) Certified Security Project Manager Practice Test

(CSPM) Certified Security Project Manager Practice Test

CSPM Security Industry-Specific Knowledge 5