Personal Protective Equipment Flashcards
6 cards from real CSO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Personal Protective Equipment flashcards as text
A worker is tasked with grinding metal, which creates flying particles. According to safety best practices, what is the most appropriate combination of Personal Protective Equipment (PPE) for this task?
Answer: A face shield worn over safety glasses
While safety glasses provide primary eye protection, a face shield is required over them to protect the entire face from the impact of flying particles created during grinding operations. This combination offers a higher level of protection against potential injuries.
Which of the following is a primary responsibility of a worker regarding their Personal Protective Equipment (PPE)?
Answer: To inspect their PPE before each use and report any defects.
Workers have a duty to inspect their PPE before each use to ensure it is in good working condition. Any damage, wear, or defects must be reported to their supervisor immediately so the equipment can be replaced.
Under the hierarchy of controls, Personal Protective Equipment (PPE) is considered:
Answer: The last line of defense against hazards.
The hierarchy of controls ranks hazard control methods from most effective to least effective. PPE is considered the last line of defense, to be used when hazards cannot be eliminated or controlled through more effective means like elimination, substitution, engineering controls, or administrative controls.
A construction site has a mandatory hard hat policy. A worker arrives on site and realizes they have forgotten their hard hat. What is the correct course of action?
Answer: Inform their supervisor immediately and do not enter the work area.
Safety policies are mandatory. If a worker does not have the required PPE, they must not enter the hazardous area. They should immediately inform their supervisor to obtain the proper equipment before starting work.
What organization's standards are typically referenced for the design, performance, and testing of PPE in Canada?
Answer: CSA Group (Canadian Standards Association)
In Canada, PPE must typically meet standards set by the CSA Group. These standards ensure that equipment like hard hats (Z94.1), protective footwear (Z195), and eye protection (Z94.3) provide an adequate level of safety for workers.
An employer's responsibility for PPE includes which of the following?
Answer: Selecting the appropriate PPE and ensuring workers are trained on its proper use.
Employers are legally responsible for conducting a hazard assessment, selecting the appropriate PPE for the identified hazards, providing it to workers, and ensuring they receive training on how to properly use, care for, and maintain the equipment.