CSL Workplace Safety & Regulatory Compliance 2 — Questions and Answers
Question 1: What is the purpose of OSHA Form 300, the Log of Work-Related Injuries and Illnesses?
- To record employee personal information
- To track and classify work-related injuries and illnesses throughout the year (Correct answer)
- To document employee performance issues
- To log safety training attendance
Correct answer: To track and classify work-related injuries and illnesses throughout the year
OSHA Form 300 requires employers to record work-related injuries and illnesses to identify patterns and improve workplace safety.
Question 2: A supervisor must conduct a safety inspection of the work area. What is the BEST approach?
- Inspect only after an incident occurs
- Conduct scheduled and unannounced inspections on a regular basis (Correct answer)
- Rely solely on employee reports of hazards
- Inspect once per year before OSHA audits
Correct answer: Conduct scheduled and unannounced inspections on a regular basis
Regular and unannounced inspections help identify hazards proactively and ensure compliance is maintained consistently, not just before audits.
Question 3: What is the hierarchy of hazard controls listed from most to least effective?
- PPE, Administrative, Engineering, Substitution, Elimination
- Elimination, Substitution, Engineering, Administrative, PPE (Correct answer)
- Administrative, PPE, Engineering, Elimination, Substitution
- Substitution, Administrative, PPE, Elimination, Engineering
Correct answer: Elimination, Substitution, Engineering, Administrative, PPE
The hierarchy places elimination at the top because removing the hazard entirely is the most effective control, while PPE is the last resort.
Question 4: Which regulation requires employers to have a written Hazard Communication Program?
- OSHA's Process Safety Management standard
- OSHA's Hazard Communication Standard (HazCom/Right-to-Know) (Correct answer)
- EPA's Clean Air Act
- ANSI Z10 standard
Correct answer: OSHA's Hazard Communication Standard (HazCom/Right-to-Know)
OSHA's HazCom Standard (29 CFR 1910.1200) requires a written program, SDS access, labeling, and employee training on chemical hazards.
Question 5: When must a supervisor report a workplace fatality to OSHA?
- Within 8 hours of the incident (Correct answer)
- Within 24 hours of the incident
- Within 72 hours of the incident
- At the end of the calendar year
Correct answer: Within 8 hours of the incident
OSHA requires employers to report all work-related fatalities to OSHA within 8 hours of finding out about them.
Question 6: What is the primary goal of conducting a toolbox talk (safety briefing) before a work shift?
- To assign blame for previous incidents
- To reinforce safety awareness and address specific hazards for that day's work (Correct answer)
- To review employee performance evaluations
- To comply with union contract requirements
Correct answer: To reinforce safety awareness and address specific hazards for that day's work
Toolbox talks are brief, focused safety discussions held before work begins to keep hazard awareness fresh and address job-specific risks.
CSL Workplace Safety & Regulatory Compliance 2
What is the purpose of OSHA Form 300, the Log of Work-Related Injuries and Illnesses?