Practice Test Geeks(CSI) Construction Specifications Institute Certification Practice Test
← All CSI Flashcard Decks

MasterFormat & Specification Structure Flashcards

7 cards from real CSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 MasterFormat & Specification Structure flashcards as text

  1. What does the acronym 'SectionFormat' refer to in CSI practice?

    Answer: CSI's recommended internal organization standard for individual specification sections

    SectionFormat is CSI's published standard defining the internal structure (Parts, Articles, Paragraphs) of individual specification sections.

  2. Division 07 in MasterFormat is designated for which work?

    Answer: Thermal and Moisture Protection

    Division 07 covers Thermal and Moisture Protection including insulation, roofing, and waterproofing.

  3. In a specification section, 'field quality control' requirements are typically placed in which Part?

    Answer: Part 3 – Execution

    Field quality control — including inspections and testing during installation — belongs in Part 3 – Execution.

  4. Which MasterFormat section would most likely contain requirements for Hydraulic Elevators specifically?

    Answer: 14 10 00

    Section 14 20 00 covers Elevators, with hydraulic elevators addressed within that section group.

  5. What is the CSI term for the complete collection of written project requirements assembled for a construction project?

    Answer: Project Manual

    The Project Manual is CSI's term for the bound volume containing bidding requirements, contract forms, conditions, and specifications.

  6. Which MasterFormat division covers Integrated Automation (building automation and control systems)?

    Answer: Division 25

    Division 25 covers Integrated Automation, including building automation systems (BAS) and control networks.

  7. A specification that describes the physical and chemical properties of a material without naming a brand is called a:

    Answer: Descriptive specification

    A descriptive specification defines materials by their measurable physical and chemical characteristics rather than by brand name or test standard.