CSCS Working at Height 2

Question 1

Under CDM 2015, who has overall responsibility for planning and managing health and safety during the construction phase?

Accepted Answer

The principal contractor

Answer

Under CDM 2015, the principal contractor has overall responsibility for planning, managing, monitoring, and coordinating health and safety during the construction phase. The client appoints the principal contractor.

Question 2

When using a mobile elevating work platform (MEWP), what must the operator hold?

Accepted Answer

A valid IPAF licence or equivalent training certification

Answer

Operators of MEWPs should hold a valid IPAF (International Powered Access Federation) licence or equivalent recognised training certification. This ensures they are competent to operate the equipment safely.

Question 3

What is the purpose of a rescue plan when working at height?

Accepted Answer

To ensure prompt rescue if a worker falls and is suspended in a harness

Answer

A rescue plan ensures that if a worker falls and is left suspended in a harness, they can be rescued promptly. Suspension trauma can be life-threatening within minutes, so a pre-planned rescue procedure is essential.

Question 4

What is the maximum recommended wind speed at which work at height should normally be stopped?

Accepted Answer

23 mph (Force 6)

Answer

HSE guidance recommends that work at height should generally be stopped when wind speeds reach 23 mph (Force 6 on the Beaufort scale), though this may vary depending on the specific task and equipment being used.

Question 5

Which regulation requires that guard rails on a scaffold platform are at a specific height?

Accepted Answer

Work at Height Regulations 2005

Answer

The Work at Height Regulations 2005 (Schedule 2) specify that guard rails must be at least 950mm above the platform edge. They must also include intermediate guard rails or toe boards to prevent falls of persons and materials.

CSCS Green Card Practice Test

CSCS Green Card Practice Test

CSCS Working at Height 2