CSCS Ireland Excavations and Electrical Safety 2

Question 1

What is a Residual Current Device (RCD) and why is it used on construction sites?

Accepted Answer

A safety device that detects earth faults and cuts power within milliseconds to prevent fatal electrocution

Answer

An RCD detects imbalances in current flow (indicating a fault or someone touching a live conductor) and disconnects power in 30 milliseconds or less, potentially before a fatal shock can be delivered.

Question 2

What should a worker do if they find a damaged electrical cable on a construction site?

Accepted Answer

Stop using the equipment, isolate the power source, report it immediately, and tag the equipment out of service

Answer

A damaged cable is a serious electrical hazard. The equipment must be immediately taken out of service, the power isolated, the defect reported, and the item tagged to prevent accidental use until properly repaired.

Question 3

What is the correct approach to excavating close to overhead electricity lines on a construction site?

Accepted Answer

Establish safe exclusion zones, use goal posts to limit vehicle height, and liaise with the network operator

Answer

Work near overhead lines requires establishing safe clearance zones, erecting goal post-type barriers to limit plant height, and coordinating with the network operator who may need to isolate or divert the line.

Question 4

What is the purpose of trench sheeting or shoring in an excavation?

Accepted Answer

To support the sides of the excavation and prevent soil collapse

Answer

Trench sheets, shoring boxes, or drag boxes support the walls of an excavation, preventing soil from collapsing onto workers. They must be designed or selected based on soil type, depth, and surcharge loads.

Question 5

How often must an excavation on a construction site be formally inspected in Ireland?

Accepted Answer

Before every work shift, after any ground movement or blasting, and after any unexpected fall of material

Answer

Excavations must be inspected by a competent person before each shift, after any event that may have affected stability (rain, vibration, blasting), and when there is any indication of danger.

CSCS Ireland Practice Test

CSCS Ireland Practice Test

CSCS Ireland Excavations and Electrical Safety 2