Practice Test GeeksCSCS Green Card Practice Test
← All CSCS Flashcard Decks

Personal Protective Equipment Flashcards

6 cards from real CSCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Personal Protective Equipment flashcards as text

  1. What are the three categories of PPE under the PPE Regulation 2016/425?

    Answer: Category I (minimal risk), Category II (intermediate risk), Category III (serious/fatal risk)

    PPE is classified into three categories: Category I covers minimal risks (e.g., gardening gloves), Category II covers intermediate risks (e.g., safety glasses, hard hats), and Category III covers serious or irreversible injury/death risks (e.g., RPE, fall arrest).

  2. How often should RPE (Respiratory Protective Equipment) face-fit testing be carried out?

    Answer: At initial issue and repeated when there are changes to the wearer's face or the RPE model

    RPE face-fit testing should be carried out at initial issue and whenever there are changes that could affect the seal, such as significant weight change, dental work, or facial scarring. It should also be repeated if the RPE model changes.

  3. What is an Assigned Protection Factor (APF) in relation to RPE?

    Answer: A number indicating the level of protection the RPE provides when properly fitted and worn

    The Assigned Protection Factor (APF) indicates the level of respiratory protection a particular type of RPE will provide when properly fitted and worn. For example, an APF of 20 means the RPE reduces exposure by a factor of 20.

  4. What colour filter is used in RPE for protection against organic vapours?

    Answer: Brown (Type A)

    Brown-coded filters (Type A) are used for protection against organic vapours and gases with a boiling point above 65°C. Different hazards require different coloured filters — it is essential to use the correct type.

  5. When must hearing protection be provided on a construction site?

    Answer: When the daily noise exposure reaches the upper exposure action value of 85 dB(A)

    Under the Control of Noise at Work Regulations 2005, employers must provide hearing protection and hearing protection zones when the upper exposure action value of 85 dB(A) daily exposure or 137 dB(C) peak is reached or exceeded.

  6. What is the purpose of a hard hat liner or chin strap?

    Answer: To ensure the hard hat stays in place, particularly in windy conditions or when working at height

    A chin strap ensures the hard hat remains securely on the head in windy conditions, when working at height, or when bending over. Without it, the hard hat could fall off precisely when protection is most needed.