General Site Safety Flashcards
6 cards from real CSCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 General Site Safety flashcards as text
What is the purpose of a site induction on a construction site?
Answer: To inform workers of site-specific hazards, emergency procedures, site rules, and welfare arrangements before they begin work
A site induction is a mandatory requirement under CDM 2015. It ensures all workers are informed of site-specific hazards, emergency procedures (muster points, first aid, fire), site rules, prohibited areas, welfare facilities, and their responsibilities before they start work on site.
What is a permit to work system?
Answer: A formal written system that authorises specific high-risk work, defining the precautions required and the persons responsible
A permit to work is a formal documented procedure for controlling high-risk activities such as hot work, confined space entry, electrical isolation, and work at height over water. It specifies the task, hazards, precautions, responsible persons, and time limits, and must be signed off before work begins and on completion.
What is a method statement?
Answer: A document describing how a work activity will be carried out safely, step by step
A method statement (also called a safe system of work or SSOW) is a document that describes how a particular task or activity will be carried out safely. It includes the sequence of work, the hazards identified, the control measures, the equipment needed, and the competent persons involved.
What does RAMS stand for in UK construction?
Answer: Risk Assessments and Method Statements
RAMS stands for Risk Assessments and Method Statements. These are the two key documents used together on UK construction sites to identify hazards, assess risks, and describe how work will be carried out safely. RAMS are typically required before any work begins on site.
What is a toolbox talk?
Answer: A short, focused safety briefing delivered to workers on a specific hazard or topic relevant to their current work
A toolbox talk is a short (typically 10-15 minute) safety briefing delivered to workers on site, focusing on a specific hazard or safety topic relevant to their current work activities. They are an effective way to reinforce safety messages, address emerging risks, and engage workers in safety discussions.
Under CDM 2015 Schedule 2, what welfare facilities must be provided on a construction site?
Answer: Sanitary conveniences, washing facilities, drinking water, changing rooms, rest facilities, and means of heating food
CDM 2015 Schedule 2 specifies minimum welfare facilities including: sanitary conveniences (toilets), washing facilities with hot and cold water, clean drinking water, changing rooms and lockers, rest facilities with seating and means for heating food and boiling water. These must be available before work starts on site.