CSCS General Site Safety 4

Question 1

What is the purpose of a risk assessment on a construction site?

Accepted Answer

To identify hazards, evaluate the risks, and determine appropriate control measures to protect workers and others

Answer

Under the Management of Health and Safety at Work Regulations 1999 Regulation 3, employers must carry out a suitable and sufficient assessment of the risks to which workers and others are exposed. The assessment identifies hazards, evaluates who might be harmed and how, and determines what control measures are needed.

Question 2

How often should toolbox talks be delivered on a construction site?

Accepted Answer

Regularly, and whenever new hazards arise, work activities change, or after incidents — typically weekly or before specific tasks

Answer

Toolbox talks should be delivered regularly (many sites conduct them weekly or daily) and whenever circumstances require, such as when new hazards are identified, work activities change, new workers arrive, after near-misses or incidents, or when introducing new equipment or processes.

Question 3

What is the difference between a risk assessment and a method statement?

Accepted Answer

A risk assessment identifies hazards and evaluates risks; a method statement describes how the work will be carried out safely step by step

Answer

A risk assessment identifies hazards, evaluates the likelihood and severity of harm, and determines control measures. A method statement then describes the safe sequence of work, step by step, incorporating those control measures. Together they form RAMS (Risk Assessments and Method Statements).

Question 4

What must a principal contractor display on a construction site under CDM 2015?

Accepted Answer

The notification of the project (F10) in a visible location accessible to all workers

Answer

Under CDM 2015 Regulation 14, the principal contractor must display the project notification (F10, submitted to the HSE by the client) in a readable condition in a position where it can be read by any worker engaged in the construction work. This ensures transparency about the key project duty holders.

Question 5

What measures should be taken to manage deliveries safely on a construction site?

Accepted Answer

Establish designated delivery areas, separate vehicle and pedestrian routes, use banksmen, and schedule deliveries to minimise congestion

Answer

Safe delivery management includes designating specific delivery and unloading areas, providing separate routes for vehicles and pedestrians, using trained banksmen to guide vehicles, scheduling deliveries to avoid congestion, ensuring adequate turning space, and briefing delivery drivers on site rules during induction.

CSCS Green Card Practice Test

CSCS Green Card Practice Test

CSCS General Site Safety 4