CSC Security System Design & Implementation 4

Question 1

A security consultant is specifying cable for an outdoor CCTV installation with long runs. Which cable type is MOST appropriate?

Accepted Answer

Fiber optic single-mode

Answer

Single-mode fiber optic cable supports long-distance runs without signal degradation and is immune to electromagnetic interference in outdoor environments.

Question 2

What is the function of a 'shunt' in an alarm circuit?

Accepted Answer

Temporarily bypass a specific zone without disarming the entire system

Answer

Shunting bypasses a specific zone, allowing authorized access through that point without triggering an alarm while the rest of the system remains armed.

Question 3

A consultant recommends 'natural surveillance' as part of a CPTED design. What does this concept involve?

Accepted Answer

Designing spaces so legitimate users can easily observe activities

Answer

Natural surveillance uses architectural and landscape design to maximize visibility, deterring crime by increasing the chance that offenders will be seen.

Question 4

During a security design review, a consultant identifies that the alarm panel has a single communication path to the monitoring center. What is the recommended fix?

Accepted Answer

Add a redundant communication path (e.g., cellular backup)

Answer

Dual communication paths ensure alarm signals reach the monitoring center even if one path (e.g., phone line) is cut or fails.

Question 5

Which lighting standard is commonly referenced for minimum illumination levels in parking facilities for security purposes?

Accepted Answer

IES RP-20

Answer

IES RP-20 (Illuminating Engineering Society) provides recommended practice for lighting of parking facilities, including security illumination levels.

(CSC) Certified Security Consultant Practice Test

(CSC) Certified Security Consultant Practice Test

CSC Security System Design & Implementation 4