CRFSC Firing Procedures and Techniques 4 — Questions and Answers
Question 1: What is the primary benefit of using a two-handed grip when firing a handgun?
- It allows the shooter to fire more rapidly
- It provides greater stability and recoil control for improved accuracy (Correct answer)
- It is required by Canadian law for all handgun shooting
- It prevents the slide from cycling and causing malfunctions
Correct answer: It provides greater stability and recoil control for improved accuracy
A two-handed grip significantly increases stability, manages recoil more effectively, and allows for faster target reacquisition after each shot.
Question 2: What is 'trigger reset' and why is it important for accurate shooting?
- Adjusting the trigger pull weight before shooting
- Releasing the trigger only far enough forward to reset the sear for the next shot (Correct answer)
- Returning the trigger to its original position after each session
- Replacing the trigger spring when it becomes worn
Correct answer: Releasing the trigger only far enough forward to reset the sear for the next shot
Trigger reset means releasing the trigger only to the point where the sear resets, minimizing unnecessary movement and allowing for faster, more accurate follow-up shots.
Question 3: When shooting at an outdoor range on a windy day, how does crosswind affect bullet trajectory?
- Wind has no effect on bullets once they leave the barrel
- Crosswind pushes the bullet in the direction the wind is blowing (Correct answer)
- Crosswind pushes the bullet against the direction the wind is blowing
- Only headwinds and tailwinds affect bullet trajectory
Correct answer: Crosswind pushes the bullet in the direction the wind is blowing
A crosswind pushes the bullet downrange in the direction the wind is blowing, requiring the shooter to adjust aim into the wind to compensate.
Question 4: What is the correct procedure before firing any firearm at a range for the first time during a session?
- Fire one test round to ensure the firearm is functioning properly
- Visually and physically inspect the bore for obstructions (Correct answer)
- Check that the magazine is full before proceeding
- Adjust the sights to the range's standard zero
Correct answer: Visually and physically inspect the bore for obstructions
Before firing, always visually and physically inspect the bore to ensure it is clear of any obstructions that could cause a dangerous pressure buildup.
Question 5: How does shooting uphill or downhill affect bullet trajectory compared to level shooting?
- Uphill shots hit higher and downhill shots hit lower than aimed
- Both uphill and downhill shots tend to hit higher than the point of aim (Correct answer)
- Uphill shots hit lower and downhill shots are unaffected
- Angle has no effect on bullet point of impact at typical ranges
Correct answer: Both uphill and downhill shots tend to hit higher than the point of aim
Both uphill and downhill angled shots result in bullets hitting higher than expected because gravity acts on only the horizontal component of the trajectory.
Question 6: What is 'muzzle rise' and what technique helps control it?
- The upward movement of the muzzle during recoil, controlled by gripping firmly and using correct stance (Correct answer)
- The increase in muzzle velocity when using a longer barrel
- The forward movement of the firearm during recoil
- The movement of the front sight post during sight adjustment
Correct answer: The upward movement of the muzzle during recoil, controlled by gripping firmly and using correct stance
Muzzle rise is the upward movement of the muzzle during recoil, which can be controlled with a firm grip, proper stance, and keeping the wrists locked.
Question 7: When firing a restricted handgun at a licensed range, where must the muzzle be pointed between firing strings?
- Toward the ground at a 45-degree angle
- At all times in the downrange direction toward the target area (Correct answer)
- Straight up toward the sky to prevent accidents
- At the ceiling, as directed by the range officer
Correct answer: At all times in the downrange direction toward the target area
Between firing strings, the muzzle must remain pointed downrange toward the target area to comply with safe range procedures and prevent accidental endangerment.
CRFSC Firing Procedures and Techniques 4
What is the primary benefit of using a two-handed grip when firing a handgun?