CRFSC - Canadian Restricted and Non-Restricted Firearm Safety Firing Procedures and Techniques Questions and Answers — Questions and Answers
Question 1: Which of the following best describes the fundamental marksmanship principle of 'sight alignment'?
- A) Placing the aligned sights onto the desired point of impact on the target.
- B) The relationship between the dominant eye, the rear sight, and the target.
- C) The proper positioning of the front sight in relation to the rear sight. (Correct answer)
- D) Focusing intently on the target just before squeezing the trigger.
Correct answer: C) The proper positioning of the front sight in relation to the rear sight.
Sight alignment is solely the relationship between the firearm's front and rear sights, independent of the target. The goal is to have the top of the front sight level with the top of the rear sight, with an equal amount of light on both sides of the front sight post.
Question 2: For maximum accuracy with a rifle, the shot should be fired during which phase of the breathing cycle?
- A) While holding a deep breath after full inhalation.
- B) During the process of slowly inhaling.
- C) At the moment of maximum exhalation.
- D) During the natural respiratory pause after exhaling. (Correct answer)
Correct answer: D) During the natural respiratory pause after exhaling.
The natural respiratory pause is the point at the bottom of the exhale when the body is most still and relaxed, minimizing movement and providing the most stable platform for an accurate shot.
Question 3: A right-handed shooter at the range notices their shots on a paper target are consistently grouped low and to the left. Assuming the firearm's sights are accurate, what is the most probable cause of this issue?
- A) Focusing on the target instead of the front sight.
- B) Jerking the trigger or anticipating the recoil. (Correct answer)
- C) Applying too much pressure with the support hand.
- D) Poor breathing control during the shot.
Correct answer: B) Jerking the trigger or anticipating the recoil.
For a right-handed shooter, jerking the trigger or anticipating the firearm's recoil often causes the hand to tighten and push the muzzle down and to the left at the moment of firing, resulting in shots impacting in that quadrant of the target.
Question 4: Which of the following statements correctly defines 'sight picture' in marksmanship?
- A) The act of ensuring the front sight is level with the rear sight.
- B) The placement of the correctly aligned sights on the desired point of impact on the target. (Correct answer)
- C) A mental image of the target before raising the firearm.
- D) The process of confirming the firearm is unloaded.
Correct answer: B) The placement of the correctly aligned sights on the desired point of impact on the target.
Sight picture is the combination of correct sight alignment (the front and rear sights aligned with each other) and the placement of those aligned sights onto the target where you intend the bullet to hit.
Question 5: In the context of firing procedures, what is the primary purpose of 'follow-through'?
- A) To rapidly prepare for a second shot by immediately resetting the trigger.
- B) To quickly look at the target to see where the shot landed.
- C) To maintain all marksmanship fundamentals for a moment after the shot is fired to ensure the bullet's path is not disturbed. (Correct answer)
- D) To allow the shooter to begin breathing again immediately after the trigger is pulled.
Correct answer: C) To maintain all marksmanship fundamentals for a moment after the shot is fired to ensure the bullet's path is not disturbed.
Follow-through is the act of maintaining the shooting form—grip, stance, sight alignment, and trigger control—for a moment after the shot breaks. This ensures that no movement disrupts the firearm while the bullet is still traveling down the barrel, which is critical for accuracy.
Question 6: A shooter wants to achieve the highest possible degree of accuracy and stability for a long-distance shot. Of the four standard firing positions, which one should they use?
- A) Standing (Offhand)
- B) Kneeling
- C) Sitting
- D) Prone (Correct answer)
Correct answer: D) Prone
The prone position, lying flat on the ground, provides the lowest center of gravity and the most points of contact with a stable surface. This makes it the most stable of the four standard shooting positions and the best choice for maximizing accuracy.
CRFSC - Canadian Restricted and Non-Restricted Firearm Safety Firing Procedures and Techniques Questions and Answers
Which of the following best describes the fundamental marksmanship principle of 'sight alignment'?