Technical Standards and Specifications Flashcards
7 cards from real CRE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Technical Standards and Specifications flashcards as text
Which reliability standard specifically addresses the application of FMECA methodology for military systems and equipment?
Answer: MIL-STD-1629A
MIL-STD-1629A defines procedures for performing Failure Mode, Effects, and Criticality Analysis (FMECA) on military systems.
According to IEEE 493 (Gold Book), what is the primary objective of reliability analysis in industrial power systems?
Answer: Quantifying the reliability and availability of power supply to loads
IEEE 493 (Gold Book) provides reliability analysis methods to quantify the expected frequency and duration of power interruptions to industrial and commercial power systems.
What does the 'Design Eye' concept in DO-160 environmental testing specify?
Answer: Environmental conditions that airborne equipment must withstand
DO-160 (RTCA/DO-160) establishes standardized environmental test conditions and procedures for airborne equipment to ensure it withstands its operational environment.
In the HALT (Highly Accelerated Life Testing) methodology, what is the primary goal of applying stepped stresses beyond rated limits?
Answer: Identify the fundamental limits of a product's design quickly
HALT applies accelerated stresses beyond operational limits to rapidly expose design weaknesses and margins, enabling design improvements before production.
Under the IEC 60300 series (Dependability management), what does the term 'availability' formally represent?
Answer: The ability of an item to be in a state to perform a required function under given conditions at a given instant
Per IEC 60300, availability is the ability of an item to perform its required function under stated conditions at a given instant or over a stated period of time.
Which ASME standard governs the design and inspection of pressure vessels in the United States?
Answer: ASME Section VIII
ASME Boiler and Pressure Vessel Code (BPVC) Section VIII provides mandatory rules for design, fabrication, inspection, and certification of pressure vessels.
What is the key difference between a 'specification' and a 'standard' in the context of reliability engineering documentation?
Answer: Specifications define requirements for a specific product/system; standards define general requirements applicable across many products
A specification states particular requirements for a specific item or system, while a standard establishes uniform technical criteria applicable broadly across products or processes.