Safety Standards Flashcards
7 cards from real CRCST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Standards flashcards as text
Which government agency regulates the labeling of hazardous chemicals under the Hazard Communication Standard (HazCom)?
Answer: OSHA
OSHA's Hazard Communication Standard (29 CFR 1910.1200) requires chemical manufacturers and employers to label hazardous chemicals and maintain Safety Data Sheets.
When transporting contaminated instruments through a hospital corridor, which practice is required?
Answer: Use a covered, leak-proof transport container
Contaminated instruments must be transported in covered, leak-proof containers to prevent exposure to patients, staff, and visitors during transit.
What is the primary safety risk associated with using enzymatic detergents in the decontamination area?
Answer: Skin and mucous membrane irritation from splashing
Enzymatic cleaners can cause skin and eye irritation if splashed; technicians must wear appropriate PPE including face shields and gloves during use.
Which type of PPE is specifically required to protect against aerosolized contaminants during high-pressure water spray decontamination?
Answer: Fluid-resistant gown and face shield
High-pressure spraying generates aerosols; a fluid-resistant gown and face shield (plus gloves) are required to protect against splash and aerosolized infectious particles.
How often must CS department staff receive refresher training on the facility's exposure control plan under the OSHA Bloodborne Pathogens Standard?
Answer: Annually
OSHA requires annual retraining on the bloodborne pathogens exposure control plan, and also whenever tasks or procedures affecting exposure are changed.
What is the correct response if a sterilizer's physical monitors (time, temperature, pressure) show an abnormal reading during a cycle?
Answer: Quarantine the load, do not release it, and investigate the sterilizer malfunction
An abnormal physical monitor reading indicates a potential sterilization failure; the entire load must be quarantined and the sterilizer must be inspected before any items are used.
Which AAMI/ANSI standard provides guidance on comprehensive sterilization practices, including safety protocols, in healthcare facilities?
Answer: ANSI/AAMI ST79
ANSI/AAMI ST79 is the comprehensive guide for steam sterilization in healthcare facilities, covering decontamination, packaging, sterilization, and safety practices.