Safety Systems & Standards Flashcards
7 cards from real CPT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Systems & Standards flashcards as text
What does the acronym 'LOTO' stand for in industrial safety procedures?
Answer: Lockout/Tagout
LOTO stands for Lockout/Tagout, which is an OSHA-required safety procedure to control hazardous energy during equipment maintenance and servicing.
In process safety, what is a 'consequence' in the context of risk assessment?
Answer: The outcome or result of a hazardous event, typically described in terms of harm or damage
A consequence is the potential outcome of a hazardous event, such as injury, fatality, environmental damage, or equipment loss, used to evaluate risk severity.
What is the primary function of a flame arrester installed on a process vent line?
Answer: To prevent flame propagation back into a vessel or pipeline by quenching the flame
A flame arrester prevents flame from traveling back through vent lines into vessels by absorbing heat and quenching the combustion reaction.
According to NFPA 70E, what level of arc flash personal protective equipment (PPE) is required based on?
Answer: The incident energy level calculated or estimated for the work task
NFPA 70E requires arc flash PPE selection to be based on the calculated or estimated incident energy level (in cal/cm²) for the specific work task.
What is a 'near miss' in process safety terminology?
Answer: An unplanned event that did not result in injury or damage but had the potential to do so
A near miss is an unplanned event that narrowly avoided causing injury, illness, or damage but had the potential to do so, and should be investigated to prevent recurrence.
In pressure vessel inspection, what does the acronym 'API 510' refer to?
Answer: The API inspection code for in-service pressure vessel inspection and repair
API 510 is the American Petroleum Institute's inspection code that governs the in-service inspection, repair, alteration, and re-rating of pressure vessels.
What is the purpose of an Emergency Shutdown System (ESD) in a process plant?
Answer: To automatically bring a process to a safe state by closing valves and tripping equipment during emergency conditions
An ESD system automatically initiates a controlled safe shutdown by isolating feeds, closing emergency valves, and stopping equipment when dangerous process conditions are detected.