CPSI Standards and Regulations 4 — Questions and Answers
Question 1: Which ASTM standard specifically addresses safety performance specifications for playground equipment intended for public use?
- ASTM F1487 (Correct answer)
- ASTM F1148
- ASTM F2373
- ASTM F1292
Correct answer: ASTM F1487
ASTM F1487 is the standard that covers safety performance specifications for playground equipment for public use.
Question 2: Under CPSC guidelines, what is the maximum acceptable height for a protective surfacing material to extend beyond the fall zone boundary?
- It must be contained within the fall zone boundary (Correct answer)
- 6 inches
- 12 inches
- 18 inches
Correct answer: It must be contained within the fall zone boundary
Protective surfacing must be contained within the fall zone and should not extend beyond its boundary in a way that creates trip hazards.
Question 3: When a state or local jurisdiction adopts a standard that is more stringent than the federal CPSC guidelines, which standard takes precedence?
- The federal CPSC guidelines always take precedence
- The more stringent state or local standard takes precedence (Correct answer)
- The facility owner chooses which to follow
- ASTM standards override both
Correct answer: The more stringent state or local standard takes precedence
More stringent state or local standards take precedence over federal CPSC guidelines because they offer greater protection.
Question 4: ASTM F1292 establishes criteria for which component of playground safety?
- Equipment structural integrity
- Impact attenuation of surfacing materials (Correct answer)
- Entrapment opening dimensions
- Age-appropriate signage
Correct answer: Impact attenuation of surfacing materials
ASTM F1292 is the standard that covers impact attenuation of surfacing materials in the playground use zone.
Question 5: According to CPSC Handbook guidelines, what is the recommended minimum use zone extension beyond the perimeter of stationary equipment?
- 4 feet
- 6 feet (Correct answer)
- 8 feet
- 10 feet
Correct answer: 6 feet
The CPSC recommends a minimum use zone of 6 feet in all directions from stationary playground equipment.
Question 6: The ADA Standards for Accessible Design require that accessible routes to playground equipment must have a maximum slope of:
- 1:10
- 1:12 (Correct answer)
- 1:16
- 1:20
Correct answer: 1:12
ADA Standards require accessible routes to have a maximum slope of 1:12 (one inch of rise per 12 inches of run).
Question 7: Which organization publishes the 'Handbook for Public Playground Safety' that serves as a primary reference for CPSI candidates?
- ASTM International
- U.S. Consumer Product Safety Commission (CPSC) (Correct answer)
- National Recreation and Park Association (NRPA)
- American Academy of Pediatrics
Correct answer: U.S. Consumer Product Safety Commission (CPSC)
The U.S. Consumer Product Safety Commission (CPSC) publishes the Handbook for Public Playground Safety.
CPSI Standards and Regulations 4
Which ASTM standard specifically addresses safety performance specifications for playground equipment intended for public use?