CPSI Rotating Equipment and Rocking Equipment Standards 2

Question 1

According to ASTM F1487, what is the maximum height of the rotating platform surface on a merry-go-round above the protective surfacing?

Accepted Answer

18 inches

Answer

ASTM F1487 limits the rotating platform height of merry-go-rounds to a maximum of 18 inches above the protective surfacing.

Question 2

Which of the following is a critical protrusion hazard that a CPSI must check for on rotating equipment during a safety inspection?

Accepted Answer

Exposed bolt ends extending beyond nuts

Answer

Exposed bolt ends protruding beyond nuts can snag clothing or cause lacerations, making them a critical protrusion hazard on rotating equipment.

Question 3

When inspecting a merry-go-round, what hazard is a CPSI evaluating when examining the clearance between the rotating platform edge and the ground?

Accepted Answer

Crush hazard for children who fall near the equipment

Answer

Inspectors check the clearance between the rotating platform and the ground to ensure no crush hazard exists for children who may fall or slide near the moving equipment.

Question 4

What set of records should a facility maintain for rotating and rocking playground equipment to demonstrate due diligence?

Accepted Answer

Inspection records, maintenance logs, and incident reports

Answer

Comprehensive documentation—including inspection records, maintenance logs, and incident reports—is required to track safety history and demonstrate responsible management.

Question 5

In playground safety, what does 'critical height' mean when referencing the surfacing beneath rotating equipment?

Accepted Answer

The fall height from which a life-threatening head injury is NOT expected

Answer

Critical height is the fall height from which a life-threatening head injury would not be expected, based on a Head Injury Criterion (HIC) value not exceeding 1000.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Rotating Equipment and Rocking Equipment Standards 2