CPSI Layout and Site Design Requirements (Use Zones) Questions and Answers 3

Question 1

For a single-axis swing with a pivot point height of 10 feet, what is the minimum use zone distance required in front of the swing?

Accepted Answer

20 feet

Answer

For swings, the use zone extends a distance of 2 times the pivot height in both the front and rear directions, so 10 ft × 2 = 20 ft.

Question 2

Under ASTM F1487, may the use zones of two adjacent pieces of playground equipment overlap?

Accepted Answer

No, use zones must never overlap

Answer

Use zones of adjacent equipment must not overlap, ensuring children exiting one piece do not enter the path of children using another.

Question 3

What is the minimum use zone required around the perimeter of a merry-go-round?

Accepted Answer

6 feet

Answer

ASTM F1487 requires a minimum 6-foot use zone extending beyond the perimeter of a merry-go-round in all directions.

Question 4

A spring rocker designed for one child is installed on a playground. What is the minimum use zone required on each side?

Accepted Answer

6 feet

Answer

Spring rockers require a minimum 6-foot use zone on all sides, consistent with the standard clearance for most non-swinging equipment.

Question 5

When a composite play structure includes a slide, how is the use zone at the slide exit determined?

Accepted Answer

A separate 6-foot use zone from the end of the slide exit must be maintained

Answer

The slide exit requires its own 6-foot use zone extending from the end of the slide, separate from the general composite structure use zone.

CPSI - Certified Playground Safety Inspector Practice Test