CPSI Equipment and Site Design Requirements Questions and Answers 5

Question 1

According to ASTM F1487, what is the minimum clearance required between the bottom of a swing seat (in its resting position) and the protective surfacing?

Accepted Answer

16 inches

Answer

Swing seats must be at least 16 inches above the protective surfacing in their resting position to prevent foot entrapment during the arc.

Question 2

Per ASTM F1487, what is the maximum number of swings permitted in a single bay of a swing structure for school-age children (5–12)?

Accepted Answer

2

Answer

No more than 2 swings are allowed in a single bay of a school-age swing structure per ASTM F1487.

Question 3

Under ASTM F1487, what is the maximum height permitted for the pivot point of a seesaw (fulcrum height) designed for children ages 2–5?

Accepted Answer

24 inches

Answer

Seesaws for preschool-age children must have pivot points no higher than 24 inches above the protective surface.

Question 4

Which ASTM standard specifically addresses the safety performance requirements of impact-attenuating surfacing materials used under playground equipment?

Accepted Answer

ASTM F1292

Answer

ASTM F1292 establishes the standard for impact attenuation of surfacing materials, specifying acceptable HIC and g-max values.

Question 5

Per ASTM F1487, what is the maximum permitted gap between a platform surface and any adjacent component (such as a ladder top) that could trap a child's torso?

Accepted Answer

3.5 inches

Answer

Gaps at platform edges adjacent to entry/exit components must be less than 3.5 inches to prevent torso entrapment.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Equipment and Site Design Requirements Questions and Answers 5