CPSI ASTM and CPSC Standards Questions and Answers 5

Question 1

ASTM F1487 identifies 'crush and shear points' as a specific mechanical hazard. Which of the following best describes this hazard?

Accepted Answer

Moving parts that can catch and compress body parts

Answer

Crush and shear points under ASTM F1487 involve moving parts — such as merry-go-round mechanisms — that can catch and compress fingers, hands, or other body parts.

Question 2

According to the CPSC Handbook, what is the recommended maximum height for climbing equipment intended for children ages 2–5 years (preschool age)?

Accepted Answer

4 feet

Answer

The CPSC Handbook recommends that equipment intended for preschool-age children (2–5 years) have a maximum height of 4 feet to limit fall severity.

Question 3

Which ASTM standard provides the specification for engineered wood fiber (EWF) used as playground surfacing material?

Accepted Answer

ASTM F2075

Answer

ASTM F2075 establishes the specification for engineered wood fiber used as playground protective surfacing, covering particle size, composition, and contamination limits.

Question 4

Under ASTM F1487, what is the maximum allowable gap between the bottom of a platform guardrail and the platform surface for equipment designed for children 5 years and younger?

Accepted Answer

3.5 inches

Answer

ASTM F1487 limits the bottom gap of guardrails to 3.5 inches on equipment for children 5 and under, preventing small children from sliding under the rail.

Question 5

The CPSC Handbook recommends that swings with full-bucket seats (designed for infants) have what type of use zone separation from tot and school-age swings?

Accepted Answer

Separated by a physical barrier or significant distance

Answer

CPSC recommends that infant bucket swings be physically separated from tot and school-age swings to prevent older children from colliding with infants.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI ASTM and CPSC Standards Questions and Answers 5