CPSI Protective Surfacing Requirements 2

Question 1

What standard governs the impact attenuation performance testing of playground surfacing materials?

Accepted Answer

ASTM F1292

Answer

ASTM F1292 is the standard specification for impact attenuation of surfacing materials in the use zones of playground equipment, measuring HIC and g-max values.

Question 2

ASTM F1951 addresses which property of playground surfacing?

Accepted Answer

Accessibility for individuals with mobility impairments

Answer

ASTM F1951 evaluates the accessibility of playground surfacing for individuals using wheelchairs and other mobility devices, measuring work of propulsion.

Question 3

What is the minimum depth of unitary rubber surfacing typically required to meet ASTM F1292 at a fall height of 10 feet?

Accepted Answer

It depends on the manufacturer's drop test data

Answer

The required thickness of unitary rubber surfacing to meet ASTM F1292 at any given fall height depends on the specific product's tested performance data provided by the manufacturer.

Question 4

Which loose-fill surfacing material is generally NOT recommended by the CPSC Handbook because it can harbor insects, decompose, and create drainage problems?

Accepted Answer

Sand

Answer

Sand, while historically common, is not recommended by CPSC because it compacts over time, can harbor insects and pathogens, and may freeze in cold climates, reducing its impact attenuation properties.

Question 5

What is the critical fall height (CFH) of a piece of playground equipment?

Accepted Answer

The maximum height from which a child could fall onto a protective surface

Answer

The critical fall height is the maximum height from which a child could fall onto a protective surface and is used to determine the required depth and performance of the surfacing material beneath and around the equipment.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Protective Surfacing Requirements 2