CPSI Playground Equipment Installation Requirements

Question 1

What is the primary reason playground equipment footings must extend below the local frost line?

Accepted Answer

To prevent frost heave from destabilizing equipment and creating tripping or structural hazards

Answer

Frost heave occurs when water in the soil freezes and expands, pushing footings upward. If footings do not extend below the frost line, equipment can shift, tilt, or create ground-level trip hazards and structural instability — all of which are safety-critical findings for a CPSI inspector.

Question 2

During a post-installation inspection, a CPSI inspector discovers that several anchor bolt heads protrude 0.75 inches above the ground surface around the equipment base. What action is required?

Accepted Answer

Require that bolts be recessed or fitted with protective covers to eliminate the protrusion hazard

Answer

Exposed, protruding hardware is a protrusion hazard that can impale or injure children. ASTM F1487 and CPSC guidelines require that hardware be recessed, covered with protective caps, or otherwise rendered non-hazardous. Painting does not eliminate the physical hazard.

Question 3

After installation, an inspector finds that the use zones of two adjacent climbing structures overlap by 3 feet. What is the correct course of action?

Accepted Answer

Recommend relocating or reconfiguring at least one structure to eliminate the use zone overlap

Answer

Overlapping use zones create a condition where a child falling from one structure can land in the path of a child using or falling from the adjacent structure. The correct remedy is physical separation — relocating or reconfiguring equipment — not surfacing adjustments or barriers within the fall zone.

Question 4

Which document must the manufacturer provide at the time of equipment delivery that a CPSI inspector would reference during a post-installation inspection?

Accepted Answer

The manufacturer's installation instructions and ASTM compliance documentation

Answer

Manufacturer-supplied installation instructions define proper assembly, torque specifications, anchoring depth, and hardware requirements. ASTM compliance documentation confirms the equipment was designed to meet applicable standards. A CPSI inspector uses these documents to verify the equipment was installed correctly.

Question 5

A CPSI inspector is verifying hardware on newly installed equipment. Which combination of findings would require immediate corrective action before the equipment is opened to the public?

Accepted Answer

One bolt is under-torqued and loose; a connecting bracket has a sharp edge measuring 0.04 inches radius

Answer

A loose bolt compromises structural integrity and represents an immediate hazard. A sharp edge with a radius under 0.04 inches (approximately 1 mm) meets the ASTM definition of a sharp-edge hazard. Both findings individually require correction before public use; together they make the equipment unsafe for opening.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Playground Equipment Installation Requirements