← All CPSI Flashcard Decks

Specific Equipment Standards for Swings and Slides Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Specific Equipment Standards for Swings and Slides flashcards as text
  1. Under ASTM F1487, what is the required minimum distance between adjacent swing bays on a multi-bay swing structure?

    Answer: 24 inches (61 cm)

    ASTM F1487 requires a minimum of 24 inches (61 cm) between adjacent swings within the same bay to reduce the risk of collisions.

  2. A slide's maximum allowable incline angle for a straight slide intended for children ages 2–5 is:

    Answer: 35 degrees

    ASTM F1487 limits the slide incline for children ages 2–5 to a maximum of 35 degrees to keep exit velocity within a safe range.

  3. Which material property makes a slide surface hazardous during summer months even without visible damage?

    Answer: Excessive surface temperature causing contact burns

    Metal and certain plastic slide surfaces can reach temperatures exceeding 150°F (65°C) in direct sunlight, causing contact burns within seconds.

  4. For a tube slide (enclosed slide), what is the minimum internal diameter required to prevent entrapment of a child's head?

    Answer: 23 inches (58.4 cm)

    ASTM F1487 requires enclosed tube slides to have a minimum internal diameter of 23 inches (58.4 cm) to prevent head entrapment.

  5. A CPSI finds that a swing's chain links have elongated beyond their original shape. This finding indicates:

    Answer: Metal fatigue requiring immediate replacement of the chain

    Elongated chain links are a sign of metal fatigue or overloading, indicating structural failure risk, and the chain must be replaced immediately.

  6. According to ASTM F1487, the use zone for a slide must extend at minimum how far from the slide's exit point in the direction of egress?

    Answer: 6 feet (1.83 m)

    The use zone must extend at least 6 feet (1.83 m) from the slide exit in the direction of egress to provide adequate landing and recovery space.

  7. Which swing seat type is specifically prohibited for installation on public playground equipment under ASTM F1487?

    Answer: Animal-figure seats with rigid components

    Rigid animal-figure or novelty swing seats are prohibited on public playgrounds because their hard protrusions pose serious impact injury risk to bystanders.