Rotating Equipment and Rocking Equipment Standards Flashcards
7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Rotating Equipment and Rocking Equipment Standards flashcards as text
According to CPSC guidelines, what is the minimum use zone distance required around rotating equipment such as merry-go-rounds?
Answer: 6 feet in all directions
CPSC guidelines require a minimum use zone of 6 feet in all directions from the outermost edge of rotating equipment.
What is the maximum height of the seat or designated play surface on a spring rocker, per CPSC public playground guidelines?
Answer: 18 inches above protective surfacing
CPSC guidelines specify that the seat or designated play surface of a spring rocker must not exceed 18 inches above the protective surfacing.
Spring rockers on public playgrounds are primarily designed for which age group?
Answer: 2–5 years
Spring rockers are designed for children ages 2–5 years because they are low to the ground and appropriate for toddler-sized users.
Which specific entrapment hazard is most associated with the mechanical component of spring rockers?
Answer: Limb entrapment in the spring mechanism
The coil or spring mechanism of spring rockers can trap children's fingers, hands, or feet, creating a limb entrapment hazard.
What design feature should seesaws incorporate to prevent impact injuries when the occupied seat strikes the ground?
Answer: Energy-absorbing material beneath each seat
Seesaws should have energy-absorbing material (such as rubber bump stops) under each seat to cushion the impact when the seat descends rapidly.
According to ASTM F1487, which safety feature is required on merry-go-rounds to reduce fall injuries to occupants?
Answer: Accessible handholds for all occupants
ASTM F1487 requires merry-go-rounds to provide handholds that are accessible to all occupants to prevent falls during rotation.
What is the primary concern a CPSI inspector focuses on when examining the pivot point of a seesaw?
Answer: Excessive wear or looseness in the pivot bearing
Excessive wear or looseness in the pivot bearing creates unpredictable movement and increases injury risk, making it the priority inspection point on a seesaw.