Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

Hazard Identification and Assessment Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Hazard Identification and Assessment flashcards as text

  1. Which ASTM standard primarily governs the safety requirements for playground equipment for public use in the United States?

    Answer: ASTM F1487

    ASTM F1487 is the Standard Consumer Safety Performance Specification for Playground Equipment for Public Use.

  2. When conducting a hazard assessment, which tool does a CPSI use to test whether an opening can entrap a child's head?

    Answer: Probe template or head entrapment gauge

    A probe template or head entrapment gauge simulates the range of child head sizes to determine if openings are hazardous.

  3. A playground inspector finds mulch depth at 4 inches beneath equipment with a critical height of 8 feet. What action is required?

    Answer: Add mulch to bring depth to at least 9 inches

    For equipment with an 8-foot critical fall height, loose fill surfacing must be at least 9 inches deep to provide adequate impact attenuation.

  4. Which of the following is NOT a recognized category of playground hazard per CPSC guidelines?

    Answer: Noise-induced hazards

    CPSC playground hazard categories include falls, entanglement, entrapment, protrusions, pinch/crush, sharp edges, and trip hazards — noise is not a recognized category.

  5. During a hazard walk-through, an inspector observes a balance beam that is 24 inches above grade. What is the mandatory surfacing requirement beneath it?

    Answer: Adequate impact-attenuating surfacing must extend to the equipment's use zone

    Any elevated play component requires impact-attenuating surfacing beneath it and within the use zone, regardless of height.

  6. A CPSI inspector notes visible cracks running along the grain of a pressure-treated wooden post. What hazard does this primarily indicate?

    Answer: Structural integrity hazard due to potential post failure

    Longitudinal cracks in structural posts can indicate significant weakening, creating a risk of structural failure under load.

  7. A CPSI inspects a tire swing and finds the drainage hole at the bottom is blocked. Why is this specifically a hazard?

    Answer: Standing water in the tire becomes a drowning hazard for small children

    A tire swing with a blocked drain can accumulate enough water to pose a drowning hazard for a toddler who falls into it.