Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

Equipment and Site Design Requirements Questions and Answers Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Equipment and Site Design Requirements Questions and Answers flashcards as text

  1. According to ASTM F1487, what is the minimum clearance required between the bottom of a swing seat (in its resting position) and the protective surfacing?

    Answer: 16 inches

    Swing seats must be at least 16 inches above the protective surfacing in their resting position to prevent foot entrapment during the arc.

  2. Per ASTM F1487, what is the maximum number of swings permitted in a single bay of a swing structure for school-age children (5–12)?

    Answer: 2

    No more than 2 swings are allowed in a single bay of a school-age swing structure per ASTM F1487.

  3. Under ASTM F1487, what is the maximum height permitted for the pivot point of a seesaw (fulcrum height) designed for children ages 2–5?

    Answer: 24 inches

    Seesaws for preschool-age children must have pivot points no higher than 24 inches above the protective surface.

  4. Which ASTM standard specifically addresses the safety performance requirements of impact-attenuating surfacing materials used under playground equipment?

    Answer: ASTM F1292

    ASTM F1292 establishes the standard for impact attenuation of surfacing materials, specifying acceptable HIC and g-max values.

  5. Per ASTM F1487, what is the maximum permitted gap between a platform surface and any adjacent component (such as a ladder top) that could trap a child's torso?

    Answer: 3.5 inches

    Gaps at platform edges adjacent to entry/exit components must be less than 3.5 inches to prevent torso entrapment.

  6. According to ASTM F1487, what is the minimum side-to-side clearance required between a swing seat at rest and the nearest support post?

    Answer: 24 inches

    ASTM F1487 requires a minimum of 24 inches of clearance between the side of a swing seat and any support structure.

  7. Under ASTM F1487, which condition would classify a climbing rope as having a strangulation hazard?

    Answer: The rope is not attached at both ends and has a free hanging length over 18 inches

    Ropes with a free hanging length greater than 18 inches that are not secured at both ends create a noose-like strangulation hazard.