Equipment and Site Design Requirements Questions and Answers Flashcards
7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Equipment and Site Design Requirements Questions and Answers flashcards as text
Under ASTM F1487, what is the minimum required clear height above protective surfacing beneath climbing components?
Answer: The component's critical height
The critical height of the equipment determines the minimum depth of protective surfacing, not a fixed clearance above it.
ASTM F1487 requires guardrails to prevent accidental falls on elevated platforms. At what platform height must guardrails be provided for equipment intended for ages 5–12?
Answer: Above 24 inches
Guardrails are required on elevated surfaces more than 24 inches above the ground for equipment intended for school-age children (5–12).
What is the maximum permitted protrusion (bolt extension) beyond a nut on playground equipment per ASTM F1487?
Answer: 1/8 inch
Bolt ends must not protrude more than 1/8 inch beyond the nut to minimize clothing snag and laceration hazards.
According to ASTM F1487, what is the minimum overhead clearance required above any play component to prevent head impact on overhead obstacles?
Answer: 7.5 feet
ASTM F1487 requires a minimum clearance of 7.5 feet above any component where a child could stand or be elevated.
What is the primary purpose of an 'accessible route' requirement on a playground per the ADA and ASTM F1487?
Answer: To ensure children with disabilities can access play components
Accessible routes connect accessible parking and entries to accessible play components so children with disabilities can participate.
Per ASTM F1487, what type of surface material is NOT considered an acceptable unitary protective surface for playgrounds?
Answer: Concrete
Concrete has no impact attenuation and is explicitly prohibited as a protective surfacing material under ASTM F1487.
Under ASTM F1487, what is the minimum angle at which a ladder rung must be oriented relative to horizontal to prevent a foot from slipping off?
Answer: Exactly horizontal (0 degrees)
Ladder rungs must be horizontal (0 degrees) so feet land flat and evenly, minimizing slip-off risk.