Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

Core Knowledge Areas Questions and Answers Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Core Knowledge Areas Questions and Answers flashcards as text

  1. According to ASTM F1292, what is the maximum acceptable impact attenuation expressed as HIC (Head Injury Criterion) for playground surfacing?

    Answer: 1000

    ASTM F1292 sets the HIC threshold at 1000; surfacing that produces a HIC value above 1000 is considered inadequate for fall attenuation.

  2. What is the minimum depth of unitary rubber surfacing required to meet fall-height standards when installed over a hard surface such as asphalt?

    Answer: The manufacturer's tested depth for the intended fall height

    Unitary surfacing must be installed at the manufacturer's tested and certified depth corresponding to the equipment's critical fall height.

  3. Under CPSC guidelines, what minimum clearance zone (use zone) is required around a single-axis swing on each side in the direction of swing travel?

    Answer: Twice the height of the pivot point above the ground

    The CPSC Handbook specifies that the use zone in front of and behind a swing must extend a distance equal to twice the height of the pivot point above the protective surfacing.

  4. Which ASTM standard specifically governs performance requirements for impact-attenuating surfacing materials used under playground equipment?

    Answer: ASTM F1292

    ASTM F1292 is the standard specification for impact attenuation of surfacing materials within the use zone of playground equipment.

  5. A CPSI finds that a steel slide has a surface temperature of 165°F on a sunny summer day. What is the primary standard concern this raises?

    Answer: Thermal burn hazard to children

    Elevated surface temperatures on metal slides and other equipment components can cause serious contact burns, making thermal hazard a primary safety concern.

  6. What is the maximum allowable opening size in a guardrail or platform barrier to prevent head entrapment according to CPSC and ASTM F1487?

    Answer: Less than 3.5 inches or greater than 9 inches

    Openings must be either smaller than 3.5 inches (too small for a child's head to enter) or larger than 9 inches (too large to trap a head) to avoid the entrapment zone.

  7. Which organization publishes the Handbook for Public Playground Safety that serves as a primary reference document for CPSI candidates?

    Answer: U.S. Consumer Product Safety Commission (CPSC)

    The CPSC publishes the Handbook for Public Playground Safety (Publication #325), which is a key reference for playground safety inspectors.