Industrial Safety and Compliance Flashcards
6 cards from real CPM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Industrial Safety and Compliance flashcards as text
A plant mechanic needs to enter a large mixing vessel to perform a repair. The vessel has limited entry/exit points, is not designed for continuous occupancy, and contains residual fumes from the chemicals it processes. According to OSHA standards, what is the MOST critical requirement before entry?
Answer: Obtaining a signed and completed permit-required confined space entry permit.
OSHA's standard for Permit-Required Confined Spaces (29 CFR 1910.146) mandates a formal written permit system for any space that meets the definition of a confined space and has one or more potential hazards, such as a hazardous atmosphere. The permit process ensures all hazards are identified, tested, and controlled, and that a rescue plan is in place before anyone enters.
According to OSHA regulations (29 CFR 1910.212), what is the primary requirement for a rotating shaft on a piece of machinery that is located less than seven feet from the floor?
Answer: It must be guarded to prevent accidental contact.
OSHA standard 29 CFR 1910.212 and 1910.219 explicitly require that all exposed parts of horizontal shafting seven feet or less from the floor or working platform must be protected by a stationary casing or guard. This is because even smooth, slow-moving shafts can catch clothing or limbs, leading to severe injury.
A plant mechanic is preparing to perform maintenance on a hydraulic pump. After notifying affected employees, what is the next critical step in the lockout/tagout (LOTO) procedure?
Answer: Shut down the equipment using the normal stopping procedure.
The standard sequence for a lockout/tagout procedure, as outlined by OSHA, is: 1) Prepare for shutdown, 2) Notify affected employees, 3) Shut down the equipment via normal procedures, 4) Isolate all energy sources, 5) Apply LOTO devices, 6) Release stored energy, and 7) Verify isolation. Therefore, after notification, the next step is to properly shut down the equipment.
Which of the following represents the MOST effective method of hazard control according to the industrial safety 'Hierarchy of Controls'?
Answer: Physically removing the source of the hazard from the process entirely.
The Hierarchy of Controls ranks hazard control methods from most to least effective. The order is: Elimination (physically removing the hazard), Substitution (replacing the hazard), Engineering Controls (isolating people from the hazard), Administrative Controls (changing how people work), and finally Personal Protective Equipment (PPE). Elimination is the most effective because it removes the hazard completely.
A mechanic is handling a cleaning solvent. The container's label displays the GHS pictogram of a flame over a circle. What specific type of hazard does this symbol represent?
Answer: Oxidizing
The Globally Harmonized System (GHS) uses specific pictograms for hazard communication. The 'flame over circle' symbol specifically indicates an oxidizing hazard. Oxidizers are chemicals that can cause or contribute to the combustion of other materials, usually by yielding oxygen.
Per OSHA and NFPA standards, what is the maximum allowable travel distance for an employee to reach a Class A fire extinguisher in a typical industrial plant setting?
Answer: 75 feet
OSHA regulation 29 CFR 1910.157(d)(2) specifies that for Class A fires (ordinary combustibles like wood, paper, and cloth), the travel distance for employees to any portable fire extinguisher must be 75 feet or less.