CPL Physical Security Surveys & Risk Assessment 3

Question 1

When recommending strike plate hardware during a security survey for a wood-frame door, what screw length is recommended to resist kick-in attacks?

Accepted Answer

3-inch wood screws

Answer

1-inch wood screws

Answer

2-inch wood screws

Answer

Lag bolts only

Question 2

In CPTED-based security surveys, what is the significance of 'sight lines'?

Accepted Answer

Unobstructed views that enable natural surveillance of an area

Answer

The cable routing path for security camera installations

Answer

The line-of-sight required for electronic key fobs to communicate with readers

Answer

The maximum distance at which a lock brand can be visually identified

Question 3

Which UL listing is most relevant when evaluating the security rating of safes during a commercial security assessment?

Accepted Answer

UL 687 (Burglary-Resistant Safes)

Answer

UL 437 (Key Locks)

Answer

UL 768 (Combination Locks)

Answer

UL 2050 (Central Station Monitoring)

Question 4

What is the primary purpose of a written security survey report delivered to a client after an assessment?

Accepted Answer

To provide prioritized vulnerability findings, recommendations, and estimated costs

Answer

To document the locksmith's liability limitations for future security incidents

Answer

To certify that the building meets all applicable local security codes

Answer

To serve as a marketing document promoting additional security upgrades

Question 5

In an access control security assessment, what does 'credential management' refer to?

Accepted Answer

The system for issuing, tracking, and revoking access credentials throughout their lifecycle

Answer

The process of duplicating physical keys for all building tenants

Answer

The installation and programming of electronic locks and card readers

Answer

The process of verifying and renewing a locksmith's professional certifications

Question 6

Which physical characteristic of a door frame most significantly affects its resistance to kick-in forced entry?

Accepted Answer

The gauge of metal reinforcement in the jamb and the fastener penetration depth into the wall stud

Answer

The color and finish applied to the door frame surface

Answer

The depth and profile of the door stop molding

Answer

The species and grain direction of the wood used in the door frame

Question 7

When evaluating an outswing door during a security survey, which hinge-related factor represents the greatest security vulnerability?

Accepted Answer

Exposed exterior hinges with removable pins that allow the door to be lifted off

Answer

The brand and manufacturer of the hinges installed

Answer

The finish color matching the other door hardware

Answer

Having only two hinges installed rather than three