CPI Inspection Procedures & Techniques 2

Question 1

When inspecting a roof from the ground level only due to safety concerns, what must the inspector do?

Accepted Answer

Note in the report that a ground-level inspection was performed and recommend further evaluation

Answer

Inspectors must disclose the scope limitation and recommend further evaluation by a specialist when a full roof inspection cannot be performed.

Question 2

Which condition would most likely cause an inspector to defer a garage door safety reverse test?

Accepted Answer

The door panels are visibly cracked and could shatter on contact

Answer

An inspector should not perform the reverse test if door panels are visibly compromised, as the test could cause injury or further damage.

Question 3

When inspecting a crawl space with standing water, the inspector should:

Accepted Answer

Note the condition, inspect as much as safely accessible, and recommend further evaluation

Answer

The inspector documents the accessible portion, notes the unsafe condition, and recommends a specialist for areas not safely reached.

Question 4

What is the primary purpose of operating a representative sample of windows during a home inspection?

Accepted Answer

To verify operability, locking function, and condition of hardware

Answer

Testing a representative sample of windows confirms they open, close, lock properly, and that hardware is functional.

Question 5

An inspector discovers an actively sparking electrical panel during an inspection. The correct action is to:

Accepted Answer

Immediately notify the client and vacate until the utility company deactivates power

Answer

An actively sparking panel is an immediate safety hazard requiring evacuation and utility notification before any further inspection.

(CPI) Certified Professional Inspector Practice Test