Safety Regulations & Compliance Flashcards
7 cards from real CPI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Regulations & Compliance flashcards as text
What is the primary purpose of a pool safety vacuum release system (SVRS)?
Answer: To automatically shut off the pump or release vacuum when a drain blockage is detected
An SVRS automatically shuts off the pump or releases the vacuum when a drain obstruction is detected, preventing suction entrapment.
According to most state health codes, what is the minimum height for a fence enclosing a residential pool?
Answer: 4 feet
Most state and local codes require a minimum barrier height of 4 feet for residential pool enclosures, though many jurisdictions require more.
A pool inspector observes that the gate in a pool barrier opens inward toward the pool. Is this a compliance issue?
Answer: Yes — pool barrier gates must open outward away from the pool
Pool barrier gates must open outward away from the pool so that a child leaning on the gate cannot inadvertently push it open.
What does DRSA stand for in the context of pool drain safety?
Answer: Dual-drain or unblockable single drain as an anti-entrapment alternative
Installing a dual main drain system or an unblockable single drain are accepted alternatives to SVRS for meeting anti-entrapment requirements.
Under ANSI/APSP-7 standards, what is the maximum flow rate for a residential spa main drain cover rated at 6 inches by 6 inches?
Answer: 50 gpm
ANSI/APSP-7 requires drain covers to be rated at a flow rate that limits the entrapment force to safe levels; a 6×6 cover is typically rated for around 50 gpm.
A CPI inspector is evaluating a commercial spa. The water temperature reads 106°F. What is the compliance finding?
Answer: Non-compliant — maximum spa water temperature is 104°F per most health codes
The CDC and most health codes limit spa water temperature to a maximum of 104°F to prevent hyperthermia and heat-related illness.
What is the purpose of the 'unblockable drain' exemption under the VGB Act?
Answer: A single drain with a surface area large enough that a person cannot block it eliminates the entrapment hazard
An unblockable drain is designed with sufficient area that no body part can fully occlude it, thereby eliminating the suction entrapment hazard without additional systems.