CPI Spa & Hot Tub Specific Requirements Flashcards
6 cards from real CPI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CPI Spa & Hot Tub Specific Requirements flashcards as text
What is the maximum water temperature recommended for public spa use according to most US health codes?
Answer: 104°F
Most US health codes set the maximum spa water temperature at 104°F to prevent hyperthermia.
Which component is required on all spa covers to prevent accidental entrapment or drowning?
Answer: Lock-down straps or locking mechanism
Spa covers must have lock-down straps or a locking mechanism to prevent unsupervised access, especially by children.
What minimum posting requirement applies to spas regarding water temperature and bather time limits?
Answer: A sign must be posted near the spa entrance
A sign displaying maximum water temperature and recommended maximum bather exposure time must be posted near the spa entrance.
How frequently should spa water be completely drained and refilled under typical public facility guidelines?
Answer: Based on calculated turnover from bather load and water volume
Drain-and-refill intervals are calculated based on bather load and total dissolved solids (TDS) accumulation relative to spa volume.
What is the purpose of an air induction system (blower) in a spa?
Answer: To inject air into jets for a bubbling/massaging effect
A blower injects air into the jet lines to create a massaging bubble effect for bather comfort.
Which condition in a spa jet system should a CPI inspector flag as a deficiency?
Answer: Broken or missing jet face covers
Broken or missing jet face covers can create sharp edges and entrapment hazards, which must be flagged.