Safety & Sanitation Standards Flashcards
7 cards from real CPE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety & Sanitation Standards flashcards as text
What is the purpose of using a pre-procedure antiseptic on the client's skin before inserting the electrolysis probe?
Answer: To reduce surface microbial load and minimize infection risk
Applying an antiseptic to the treatment area reduces the number of transient and resident microorganisms on the skin surface before follicle entry.
A Material Safety Data Sheet (now called Safety Data Sheet/SDS) in an electrology practice provides information about:
Answer: Chemical hazards, handling, and first-aid measures for products used
An SDS (formerly MSDS) details a chemical substance's hazards, safe handling, storage requirements, and first-aid responses as required by OSHA's Hazard Communication Standard.
Which of the following is an example of Standard Precautions being applied correctly in an electrology practice?
Answer: Wearing gloves for every client regardless of their health disclosure
Standard Precautions require treating every client as potentially infectious and wearing appropriate PPE with all clients, not only those who disclose health conditions.
Which regulatory agency primarily governs bloodborne pathogen exposure control requirements in a professional electrology workplace?
Answer: OSHA (Occupational Safety and Health Administration)
OSHA enforces the Bloodborne Pathogens Standard (29 CFR 1910.1030), which sets legally binding workplace requirements for exposure control, PPE, and training.
Contaminated laundry such as treatment table covers should be handled how in an electrology setting?
Answer: Handled minimally, bagged at the point of use, and washed in hot water with detergent
OSHA requires contaminated laundry to be handled as little as possible, bagged where it was used to prevent aerosolization, and laundered according to infection control standards.
What is the correct dilution ratio for a common sodium hypochlorite (bleach) solution used for surface disinfection in electrology?
Answer: 1:10 (1 part bleach to 10 parts water)
The CDC recommends a 1:10 dilution of household bleach (approximately 5,000–6,000 ppm sodium hypochlorite) for disinfecting surfaces potentially contaminated with blood.
Electrologists must maintain client treatment records related to sanitation incidents primarily to:
Answer: Provide documentation for liability protection and state board inspections
Accurate sanitation and incident records protect the practitioner legally and are required documentation during state board inspections and any regulatory investigations.