Practice Test Geeks(CPE) Certified Professional Electrologist Practice Test
← All CPE Flashcard Decks

CPE Equipment & Technology Flashcards

6 cards from real CPE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CPE Equipment & Technology flashcards as text

  1. What does 'blend' modality combine in electrolysis?

    Answer: Galvanic direct current and thermolysis high-frequency current used simultaneously

    Blend electrolysis uses both galvanic DC and thermolysis AC simultaneously, with the heat from thermolysis accelerating the chemical reaction of galvanic current.

  2. Why must all reusable electrolysis instruments that contact mucous membranes or break the skin be sterilized (not just disinfected)?

    Answer: Because sterilization destroys all microbial life including spores, which disinfection alone cannot achieve

    Instruments that penetrate the skin are classified as critical items and must be sterilized to eliminate all pathogens including bacterial spores.

  3. What is the purpose of a spore test (biological indicator) used with autoclave sterilizers in an electrology practice?

    Answer: To verify that the autoclave is achieving sterilization conditions that kill the most resistant microorganisms

    A biological indicator containing heat-resistant spores confirms the autoclave reaches conditions lethal enough to kill the hardest-to-kill organisms, validating sterilization efficacy.

  4. Which lighting condition is most important for an electrology treatment room?

    Answer: Bright, shadow-free illumination directed at the treatment area for accurate probe insertion

    Bright, directed, shadow-free lighting is essential for the electrologist to visualize fine hair follicles precisely and perform accurate insertions.

  5. When should an electrologist replace a probe during a client's treatment session?

    Answer: After each client, or immediately if the probe becomes visibly damaged or bent

    Single-use probes must be replaced between clients; a bent or damaged probe should be replaced immediately to prevent inaccurate insertions and tissue trauma.

  6. What is the purpose of the rheostat or intensity dial on a galvanic epilator?

    Answer: To adjust the milliamperage of direct current delivered to the follicle

    The rheostat controls the milliamperage of galvanic DC output, directly determining the strength of the chemical reaction that destroys the follicle.