Industry Standards & Application in Engineering Design Flashcards
7 cards from real CPCE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Industry Standards & Application in Engineering Design flashcards as text
In the context of EU Machinery Directive 2006/42/EC, CFD thermal analysis of industrial equipment is typically used to demonstrate compliance with which essential safety requirement?
Answer: Protection against surface temperatures hazardous to operators
The EU Machinery Directive requires that equipment surfaces do not reach temperatures that could injure operators, which CFD thermal analysis can quantify.
Which NAFEMS publication provides specific guidance on the verification of CFD solvers through manufactured solution benchmarks?
Answer: NAFEMS CFD Workbook of Examples
The NAFEMS CFD Workbook of Examples provides benchmark problems specifically designed to verify CFD solver correctness through comparison with analytical and manufactured solutions.
According to ASME B31.3 Process Piping Code, CFD analysis of two-phase flow regimes is most commonly applied to address which design concern?
Answer: Flow-induced vibration and erosion-corrosion at fittings
B31.3 addresses process piping integrity, and CFD is applied to predict two-phase flow regimes that drive flow-induced vibration and accelerated erosion at bends and fittings.
In the automotive industry, which SAE standard governs the use of CFD for aerodynamic drag coefficient (Cd) prediction and correlation with wind tunnel data?
Answer: SAE J2966
SAE J2966 provides guidelines for using CFD in vehicle aerodynamic development, including Cd prediction methodology and wind tunnel correlation requirements.
Under EPA Method 18 or equivalent regulatory frameworks, CFD dispersion modeling for stack emissions must account for which atmospheric boundary layer parameter?
Answer: Atmospheric stability class and mixing height
Regulatory dispersion modeling requires characterization of atmospheric stability (Pasquill-Gifford class) and mixing height to accurately predict pollutant transport.
The concept of 'solution verification' in the ASME V&V 20 framework specifically addresses:
Answer: Quantification of numerical errors including discretization and iteration error
Solution verification in ASME V&V 20 focuses on quantifying numerical errors such as discretization error (grid convergence) and iterative convergence error.
When performing CFD analysis for HVAC system design per ASHRAE Standard 55, the primary thermal comfort parameter that CFD uniquely resolves compared to simple zone models is:
Answer: Spatial distribution of air velocity and local radiant asymmetry
ASHRAE 55 thermal comfort criteria depend on local air velocity and radiant temperature asymmetry, which CFD resolves spatially unlike lumped zone models.