CPC CPC Building Codes, Permits & Inspections 3

Question 1

What is the purpose of an 'energy code compliance report' required for new commercial buildings?

Accepted Answer

Demonstrate that the building envelope, mechanical, and lighting systems meet minimum energy efficiency requirements of IECC or ASHRAE 90.1

Answer

Track contractor profit margins

Answer

Calculate the owner's utility costs

Answer

Verify equipment warranties meet code minimums

Question 2

Under the IBC, when is a building required to have an automatic fire sprinkler system?

Accepted Answer

Based on occupancy type, construction type, height, and area — often required for all new commercial buildings under IBC Section 903

Answer

Only when the building exceeds 100,000 sq ft

Answer

Only in high-rise buildings over 75 feet

Answer

Only when the fire department requires it

Question 3

What is a 'stop work order' and what authority can issue one on a construction site?

Accepted Answer

An official directive to halt construction activity due to code violations, safety hazards, or permit non-compliance; issued by building officials or OSHA

Answer

A contractor's internal pause for weather; the project manager

Answer

A design change that stops work for redesign; the architect

Answer

A supply chain delay notice; the material supplier

Question 4

In a fire-rated wall assembly, what is the purpose of 'firestopping' at penetrations?

Accepted Answer

Seal openings where pipes, conduits, and ducts penetrate fire-rated assemblies to prevent fire and smoke spread

Answer

Provide structural support for pipes and conduits

Answer

Insulate mechanical systems from heat loss

Answer

Anchor curtain wall panels

Question 5

What is a 'punch list' in the context of project closeout and inspections?

Accepted Answer

A documented list of incomplete or defective work items that must be corrected before final acceptance

Answer

A list of pending subcontractor invoices

Answer

The final project schedule milestone list

Answer

A list of deferred maintenance items excluded from the contract

Question 6

Which accessibility code standard provides the technical specifications that states and local governments adopt for accessible construction?

Accepted Answer

ADA Standards for Accessible Design (based on ICC/ANSI A117.1)

Answer

OSHA 29 CFR 1926

Answer

IBC Chapter 11 only

Answer

Fair Housing Act Guidelines