Practice Test Geeks(CPA) Certified Pesticide Applicator Practice Test
← All CPA Flashcard Decks

Pesticide Label Comprehension Flashcards

7 cards from real CPA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Pesticide Label Comprehension flashcards as text

  1. A pesticide label states 'for use by certified applicators only.' A homeowner purchases the product and applies it themselves. This is:

    Answer: A violation of FIFRA because the product is restricted to certified applicators

    Products designated for use by certified applicators only are restricted-use pesticides (RUPs) and cannot be legally applied by uncertified individuals.

  2. What does 'mode of action' refer to in relation to a pesticide label?

    Answer: The biological or chemical process by which the pesticide kills or controls the target pest

    Mode of action describes how the pesticide affects the target pest physiologically, which is important for resistance management and rotation of chemistries.

  3. A label requires the applicator to wear 'a chemical-resistant apron when mixing.' When is this PPE requirement in effect?

    Answer: Only during loading and mixing operations, not during application

    PPE requirements on labels often specify the task, and in this case the apron is required specifically during mixing/loading activities.

  4. Which label element helps an applicator determine how far to stay from a school or playground during application?

    Answer: Buffer zone or sensitive site restrictions

    Buffer zone and sensitive site restriction language in the label specifies minimum distances from schools, playgrounds, water bodies, and other sensitive areas.

  5. An applicator cannot read the pesticide label because it has been damaged by moisture. What should they do?

    Answer: Do not use the product until a legible label or copy is obtained

    Using a pesticide without a legible label is a FIFRA violation; the applicator must obtain a legible label before applying.

  6. What does the Establishment Number (EPA Est. No.) on a pesticide label indicate?

    Answer: The manufacturing facility where the product was produced

    The EPA Establishment Number identifies the specific facility where the pesticide product was manufactured or packaged, used for traceability and enforcement.

  7. A pesticide label states 'Do not apply when wind speed exceeds 10 mph.' An applicator applies the product at 12 mph wind. Which risk does this primarily create?

    Answer: Off-target drift that may harm non-target plants, animals, or people and constitutes a label violation

    Applying in excess wind speeds causes pesticide drift onto non-target areas and violates the label's application conditions, creating both legal liability and environmental harm.