Mobilyze System Operation & Navigation Flashcards
7 cards from real CMO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Mobilyze System Operation & Navigation flashcards as text
When Mobilyze detects a conflict between two overlapping geofence zones, the system resolves the conflict by:
Answer: Applying the higher-priority zone's rules as defined in the geofence configuration
Mobilyze resolves geofence conflicts by enforcing the rules of the higher-priority zone as set in the operator's geofence configuration.
To safely transfer an active Mobilyze session to another operator workstation without data loss, the operator should use the:
Answer: Session Handoff function which saves state and migrates the session securely
The Session Handoff function preserves active session state and securely migrates it to the receiving workstation without data loss.
In Mobilyze, the 'Anchor Point' feature is used to:
Answer: Designate a fixed reference coordinate for relative navigation calculations
An Anchor Point defines a fixed reference coordinate that the system uses as a base for relative distance and bearing calculations during navigation.
Which Mobilyze alert level requires the operator to immediately acknowledge and log a corrective action before resuming operations?
Answer: Level 4 – Critical
Level 4 Critical alerts mandate immediate operator acknowledgment and a logged corrective action before the system permits resumed operation.
An operator needs to restrict a Mobilyze unit to a specific geographic corridor and prevent it from accepting routes outside that corridor. The correct configuration is a:
Answer: Constrained Navigation Boundary with hard exclusion rules
A Constrained Navigation Boundary with hard exclusion rules enforces a strict corridor and blocks route acceptance outside the defined area.
When using Mobilyze's 'Follow-Me' mode, the system automatically:
Answer: Continuously updates the unit's destination to match the real-time position of a designated lead tracker
Follow-Me mode dynamically updates the unit's target destination to continuously track and follow the real-time position of a designated lead.
If a Mobilyze unit's onboard storage reaches 90% capacity during an active mission, the system will by default:
Answer: Trigger a storage warning alert and begin auto-archiving older logs to the server
At 90% storage capacity, Mobilyze triggers a storage warning and initiates automatic archiving of older logs to the remote server to maintain operational continuity.