Practice Test Geeks(CMI) Cleaning Management Institute Certification Practice Test
← All CMI Flashcard Decks

Health & Safety Standards Flashcards

7 cards from real CMI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Health & Safety Standards flashcards as text

  1. Which OSHA standard specifically governs Hazard Communication in the cleaning industry?

    Answer: 29 CFR 1910.1200

    OSHA's Hazard Communication Standard (HazCom), 29 CFR 1910.1200, requires employers to inform workers about chemical hazards through labels, Safety Data Sheets, and training.

  2. A cleaning employee develops a skin rash after repeated contact with a disinfectant. This is best classified as:

    Answer: Contact dermatitis

    Contact dermatitis is an inflammatory skin reaction caused by repeated or prolonged exposure to chemicals such as disinfectants and cleaning agents.

  3. When diluting concentrated chemical cleaners, the correct and safest procedure is to:

    Answer: Add concentrate to water

    Always add concentrate to water to prevent dangerous exothermic reactions or splashing that can occur when water is added to concentrate.

  4. Which type of fire extinguisher is appropriate for a chemical/solvent fire in a cleaning facility?

    Answer: Class B

    Class B extinguishers are designed for fires involving flammable liquids, solvents, and chemical-based cleaning products.

  5. A Safety Data Sheet (SDS) Section 8 provides information about:

    Answer: Exposure controls and personal protective equipment

    SDS Section 8 (Exposure Controls/Personal Protection) outlines permissible exposure limits, engineering controls, and required PPE for safe chemical handling.

  6. What is the primary purpose of a Lockout/Tagout (LOTO) program in cleaning operations?

    Answer: To prevent accidental energization of equipment during maintenance

    Lockout/Tagout (OSHA 29 CFR 1910.147) prevents the unexpected startup or release of stored energy in equipment during servicing and maintenance activities.

  7. A cleaning worker exposed to a bloodborne pathogen splash should FIRST:

    Answer: Wash the affected area thoroughly with soap and water

    Immediate and thorough washing of the affected area with soap and water is the first critical step to reduce the risk of infection following bloodborne pathogen exposure.