Practice Test Geeks(CMC) Certified Moving Consultant Practice Test
← All CMC Flashcard Decks

Load Planning & Weight Distribution Flashcards

7 cards from real CMC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Load Planning & Weight Distribution flashcards as text

  1. What is the significance of a shipment's 'density' in load planning?

    Answer: It helps calculate how much space high-weight items require relative to low-weight items

    Density (weight per cubic foot) helps planners understand whether a shipment will fill the truck by volume or by weight limit first, guiding load decisions.

  2. A moving consultant is estimating a shipment that includes a 7-piece bedroom set, 5-piece dining set, and full kitchen. Approximately how many cubic feet should be estimated?

    Answer: 600–800 cu ft

    A typical 3-bedroom household with those furnishings averages 600–800 cubic feet, which fits within a 26-foot truck's approximate 1,800 cu ft capacity with room for packing.

  3. Why is it critical to distribute weight evenly side-to-side (laterally) in a moving truck?

    Answer: Imbalanced lateral weight increases rollover risk during turns

    Side-to-side weight imbalance raises the center of gravity on the heavier side, significantly increasing rollover risk when the truck corners or swerves.

  4. What does 'tare weight' mean in the context of a moving truck weigh ticket?

    Answer: The weight of the empty truck before loading

    Tare weight is the weight of the empty truck; subtracting tare from gross (loaded) weight gives the net weight of the shipment.

  5. When is it most appropriate to use a cargo net in a moving truck?

    Answer: To contain smaller loose items and prevent them from sliding under larger furniture

    Cargo nets are used to contain loose, small items — such as lamp shades, pillows, or bagged goods — preventing them from migrating under heavy furniture during transit.

  6. A moving crew is loading a storage unit move with many boxes of similar size and weight. What is the best strategy to maximize both space and stability?

    Answer: Interlace box layers in a brick pattern to create structural integrity

    Brick-pattern interlacing (alternating the direction of each layer) distributes compressive forces and prevents column collapse, similar to how bricks are laid in a wall.

  7. Which factor most directly determines whether a moving truck requires a commercial driver's license (CDL) to operate in the US?

    Answer: The truck's gross vehicle weight rating (GVWR) exceeding 26,000 lbs

    Federal law requires a CDL for operating any commercial motor vehicle with a GVWR over 26,000 lbs; this threshold is the primary CDL trigger for moving trucks.