CLEET CLEET Firearms Training & Range Safety 2 — Questions and Answers
Question 1: CLEET firearms training identifies 'muzzle discipline' as the practice of:
- Keeping the muzzle clean after each firing session
- Always controlling the direction the muzzle points so it never sweeps an unintended target (Correct answer)
- Using a suppressor to reduce muzzle blast
- Adjusting the front sight for windage
Correct answer: Always controlling the direction the muzzle points so it never sweeps an unintended target
Muzzle discipline means the shooter maintains conscious, continuous control of where the barrel is pointed so it never inadvertently covers a person or unintended object.
Question 2: According to CLEET standards, when should an officer conducting a press check verify a round is chambered?
- Only when the firearm has been out of the officer's control
- During every magazine change in the field
- As a routine part of administrative loading before going on duty (Correct answer)
- After every shot fired on the range
Correct answer: As a routine part of administrative loading before going on duty
A press check to confirm a chambered round is a standard step during the administrative loading procedure before an officer goes on duty, ensuring the firearm is ready.
Question 3: Which malfunction clearance technique does CLEET firearms training prescribe for a failure-to-fire (hang fire or dud round)?
- Immediately disassemble the firearm
- Keep the firearm pointed downrange for at least 30 seconds before opening the action (Correct answer)
- Shake the firearm vigorously
- Remove the magazine and rack the slide twice rapidly
Correct answer: Keep the firearm pointed downrange for at least 30 seconds before opening the action
A hang fire may detonate after a short delay, so CLEET instructs shooters to keep the muzzle pointed downrange for at least 30 seconds before attempting to clear the round.
Question 4: CLEET ballistics training teaches officers that 'over-penetration' of a projectile is a concern primarily because:
- It damages the firearm's barrel
- A round that exits the intended target can strike unintended persons beyond (Correct answer)
- It reduces accuracy at close range
- It indicates substandard ammunition quality
Correct answer: A round that exits the intended target can strike unintended persons beyond
Over-penetration means the bullet passes through the target and continues, posing a lethal danger to bystanders, structures, or others in the background.
Question 5: Under CLEET range safety regulations, the primary responsibility of the Range Safety Officer (RSO) is to:
- Record qualification scores
- Enforce all safety rules and stop any unsafe act immediately (Correct answer)
- Provide marksmanship coaching to all shooters
- Issue ammunition to participants
Correct answer: Enforce all safety rules and stop any unsafe act immediately
The RSO's primary role is safety oversight — they have absolute authority to halt firing and correct any unsafe condition or behavior on the range.
Question 6: CLEET firearms curriculum addresses 'tunnel vision' during high-stress encounters as a physiological response that can:
- Improve accuracy by narrowing focus
- Cause officers to miss threats in their peripheral field of view (Correct answer)
- Increase reaction speed by filtering distractions
- Have no effect on shooting performance
Correct answer: Cause officers to miss threats in their peripheral field of view
Tunnel vision under stress narrows an officer's perceptual field, causing them to fixate on the primary threat while missing flanking dangers or additional subjects.
CLEET CLEET Firearms Training & Range Safety 2
CLEET firearms training identifies 'muzzle discipline' as the practice of: