CLC Quality Inspection & Punch Lists 2

Question 1

When inspecting installed trim work, which defect should be flagged on the punch list as a structural concern rather than a cosmetic one?

Accepted Answer

Gaps exceeding 1/8" at miter joints

Answer

Gaps exceeding 1/8" at miter joints can allow moisture infiltration, making it a structural/durability concern beyond cosmetic.

Question 2

A lead carpenter discovers a door that swings open on its own during a final walkthrough. What is the most likely cause to document on the punch list?

Accepted Answer

Door frame is out of plumb

Answer

A door that swings open on its own typically indicates the door frame is out of plumb, causing gravity to pull the door in one direction.

Question 3

During a punch list inspection, you notice cabinet doors that don't align evenly. The FIRST corrective action to attempt is:

Accepted Answer

Adjust the hinge screws to realign doors

Answer

Most European-style cabinet hinges have adjustment screws for up/down, left/right, and depth, making hinge adjustment the first and least invasive fix.

Question 4

Which method is most reliable for verifying that a newly installed exterior door is properly weather-sealed during a quality inspection?

Accepted Answer

Check for daylight visible around the door frame in a darkened room

Answer

Checking for visible daylight around the door frame in a darkened room is a reliable field method to identify air and weather infiltration gaps.

Question 5

On a punch list, items are often categorized by priority. Which item would typically be classified as 'safety-critical' requiring immediate correction?

Accepted Answer

Stair handrail not secured to wall

Answer

An unsecured stair handrail is a fall hazard and safety-critical item requiring immediate correction before occupancy.

(CLC) Certified Lead Carpenter Practice Test

(CLC) Certified Lead Carpenter Practice Test

CLC Quality Inspection & Punch Lists 2